542995
17
Zoom out
Zoom in
Previous page
1/136
Next page
16
WIDE PANEL
This flashgun is equipped with a built-in wide panel,
which can provide an ultra wide 17mm angle of
coverage. Slide out the wide panel and catch light
panel and flip it down to cover the flash’s head. (Be
careful to slide the panels out smoothly.) Then put the
catch light panel back in its place. The coverage
angle setting of the flash will be set to 17mm
automatically.
If the built-in wide panel comes off accidentally, the ZOOM button will not function. In this case
please contact the store where the flash was purchased or a Sigma service station.
LCD PANEL ILLUMINATION
When you press the LIGHT button, the LCD panel will illuminate for about 8 seconds. The illumination
stays on longer than 8 seconds if you press the LIGHT button once again.
TTL AUTO FLASH
In the TTL AUTO Mode, the camera will control the amount of flash lighting to provide the appropriate
exposure for the subject.
1. Set the camera’s exposure mode to
P
Mode. (In the case of SA-300,
SA-300N and SA-5 set to “
” fully automatic mode)
2. Turn on the power switch of the flash, the TTL mark will appear on the
LCD panel and flash will start charging. (If TTL mark does not appear,
depress the MODE button several times to select the TTL mode).
3. Focus on your subject.
4. Check that the subject is located within the effective distance range,
indicated on the LCD panel.
5. Press the shutter button, after the flash is fully charged.
When the flash is fully charged, the ready light in the viewfinder, and
appears on the flash unit.
The TTL exposure is controlled by the S-TTL system of the digital camera. If the flash is set to TTL,
the character "d" (digital) will be displayed on the LCD panel.
When the camera receives the appropriate exposure, the TTL mark on the LCD panel will appear for
5 seconds. If this indication does not appear, the flash illumination is not enough for that situation.
Please re-take the picture, at a closer distance.
The AF Auxiliary Light will turn on automatically as you focus on a subject in a dark area. The
effective range of the AF Auxiliary Light is up to about 0.7meter to 9 meters (2.3-29.5 feet).
If the SA-300, SA-300N and SA-5 cameras, are set to “
” fully automatic mode, Flash will
automatically switch to TTL mode only. For other camera exposure modes, the flash will be set to the
last chosen mode each time.
When the flash is fully charged, the flash mark will appear in the finder. If the shutter is released
before the flash is fully charged, the flash will not fire, and the camera will take the picture at a slow
shutter speed.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sigma EF-610 DG SUPER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sigma EF-610 DG SUPER in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info