668520
8
Zoom out
Zoom in
Previous page
1/64
Next page
After you have nished welding, press the release
trigger positioned under the nozzle and guide
the nozzle all the way to the right. The drive will
immediately stop when you move the nozzle to the
right. Set the nozzle in a position pointing upwards.
To activate the cooling down sequence simply
push the fan button and wait. Text “Cooling!” will
appear in the display window. The heat is turned off
immediately but the fan will continue to run and will
stop automatically after the temperature has dropped
to a sufcient cool down level.
Wait until the cooling process is nished before you
turn off the power at the main switch.
STOPPING THE MACHINE AND COOLING DOWN
- 8 -
OPERATION
Stop the machine as described and remove the plug from designated power source.
CHANGING THE HEATING ELEMENT
!
WARNING! To reduce the risk of re or electric shock, make sure that the TW 5000 hot-air
welding machine is disconnected from the supply circuit before changing the heating element.
WARNING! Touching the element housing and/or nozzle during or after operation could cause
burns.
CAUTION! Element housing and/or nozzle have hot surfaces. Allow the hot-air welding machine
to cool down before you exchange the heating element.
!
CAUTION! Hot surface; avoid
contact. This cooling process is
necessary to avoid damage to
the heating element.
!
1
2
3
MAINTENANCE
GB
8


Need help? Post your question in this forum.

Forumrules
1

Forum

sievert-tw-5000

Reset search

  • What would keep the tw 5000 from powering the display besides the power source. Submitted on 21-2-2023 at 05:38

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sievert TW-5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sievert TW-5000 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info