668519
9
Zoom out
Zoom in
Previous page
1/40
Next page
DW 2000
Trouble shooting
First action in case of error message.
Unplug the tool and wait until the display turns off. Reconnect the tool and test it again. If
the error code persists or the error occurs again during operation see the troubleshooting
list below.
8
GB
CE Declaration of conformity
Sievert AB, P.O. Box 1366, 171 26 Solna - Sweden, manufacturer of this product, declares it complies with the requirements of the
following European Directives:
Directives: LVD 2006/95/EC
EMC 2004/108/EC
MD 2006/42/EC
RoHS 2011/65/EU
Harmonized Standards LVD: IEC/EN 60335-2-
45:2003+A1:2008 used in conjunction with
IEC/EN 60335-1:2011+A11:2014
Harmonized Standards EMC EN 55014-1: 2006 + A1: 2009 + A2: 2011
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 61000-3-2: 2014
EN 61000-3-3: 2013
Harmonized Standards RoHS: EN 50581:2012
Stockholm, July 2015
Katrin Lambing Mathias Karlsson
Quality Manager Sievert R&D Department Sievert
Maintenance, Service and Repairs
Before any work on the unit: Remove the tool from the power source - Check the power
cord and plug for any visible damage. - For secure and proper operation, keep the unit and
the ventilation slots clean at all time. - Use only original Sievert accessories. If the tool does
not work after following the trouble shooting guide then unit should be taken to an author-
ized Sievert Dealer.
Disposal
Do not dispose this power tool into household waste!
According to European Directive 2012/19/EU (WEEE), power tools that are no longer suit-
able for use must be sent for recovery in an environment-friendly manner in according to
national law.
Error Code Cause Correction
Defective heating element Change heating element, see page 6
Defective fan Contact Sievert Dealer
Unit overheated Turn off the tool for 3 min and clean air intake
Low incoming voltage under
90 V ( 160 V : 230 V version)
Check power supply, push minus button in
AC.on mode to see incoming voltage
High incoming voltage
over 130 V ( 250 V : 230 V
version)
Check power supply, push minus button in
AC.on mode to see incoming voltage
Temperature sensor failure Contact Sievert Dealer
Safety Instructions
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sievert DW 3000 Hot-Air Tool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sievert DW 3000 Hot-Air Tool in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info