473301
26
Zoom out
Zoom in
Previous page
1/54
Next page
SIERRA VIDEO
20
Alarms
Alarms may be enabled per channel for audio-loss and over-level. Alarms may be enabled per
channel pair for anti-phase and carrier-loss (AES/EBU inputs only). Thresholds and timeouts are
adjustable for each alarm type for both digital and analog bar types.
An alarm condition is provided in the form of flashing colored rectangles situated at the top of the
respective bargraphs. Refer to the On-screen alarms and phase indicators section for further
details.
Anti-phase alarm
The anti-phase alarm threshold can be set for any negative value or any value less than -0.5.
The later setting may be preferred to reduce unwanted anti-phase alarms, since most audio
signals may cause negative indications.
Resetting alarms
Alarm indication normally persists even though the underlying condition that triggered the alarm is
no longer present. To ensure that outdated alarms are removed, the Alarm Auto
Reset function forces all active alarms off after an adjustable period of time. Any alarm conditions
that are still present will then re-trigger the appropriate alarm.
Using ALARM-xx frames
Up to four LAN connected ALARM-xx frames may be assigned using the search facility in the
ALARMS-xx sub-menu.
Network Settings
These settings only need to be manually entered if DHCP is set to NO. This would be required for
a network that uses fixed IP addresses and does not rely on a DHCP server to allocate them
automatically. If DHCP is used, the settings are grayed out but should nevertheless be valid
provided the DHCP server has updated the frame. Identify is the MAC address or physical
address of the IP port; it is unique to the frame and cannot be changed.
Tip: The IP address must be unique on the network. Please see your system administrator if these details
are required.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sierravideo Sierra View MADI-XX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sierravideo Sierra View MADI-XX in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info