75475
7
Zoom out
Zoom in
Previous page
1/48
Next page
Installing the unit
7
en
must be placed on a firm flat surface to ensure
that it is stable during spinning.
Soft floor coverings, such as carpets or foam-backed flooring
are not suitable surfaces for installation.
! If you have a   floor, the appliance must be
placed on a water-resistant wooden board, 30 mm thick.
It must be screwed to the floor. The appliance should be
installed in a corner of the room if possible.
Secure the appliance to the floor using fastening brackets
fitted to the machine's feet (especially if the machine is a
combined washer/dryer).
If the machine is placed on a pedestal or raised base, the feet
must be fixed using brackets to prevent the machine from
shifting during the spin cycle.
The fastening brackets are available as a spare parts set from
your specialist distributor.
Aligning the appliance
The appliance must sit firmly and horizontally on the four feet
without rocking.
m Use a spirit level to ensure that all four sides of the appliance
are level.
Correct any imbalance by adjusting the height of the feet.
m Loosen the locknuts.
m Adjust the height of the feet.
m Tighten the locknuts securely so that the height set
is retained.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WXB 1060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WXB 1060 in the language / languages: English, French as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info