790187
51
Zoom out
Zoom in
Previous page
1/76
Next page
Crease-removal function en
51
4. Refresher-container is empty,
please re-fill. will appear on the
display.
Note: If Refresher-container is
empty, please re-fill. does not
appear on the display, the water tank
is already filled with the correct
amount of water and the program
will start.
5. Pull out the condensation container
horizontally.
6. Use the water jug provided to pour
approx. 180 ml cold drinking water
into the filling hole in the front of the
appliance, until Refresher-container
is empty, please re-fill. goes out on
the display and an audible signal
sounds.
Note: If you pour more than 180 ml
drinking water into the appliance and
Refresher-container is empty,
please re-fill. does not go out on the
display, this means that the drinking
water has been poured into the
wrong filling hole or the appliance is
not fully level. Pour the drinking
water into the filling hole on the front
or make the appliance level.
~ "Installing the appliance"
on page 13
7. Push the condensation container
back into the appliance until you feel
it lock into place.
8. Press Start/Reload .
Programs for removing
creases
Do not run crease-removal programs
without a load in the drum. Comply
with the washing instructions on the
clothing label and do not exceed the
maximum permitted load for the
crease-removal
programs.~ Page 27
Opening the door during a crease-
removal program pauses the
program. To resume the program,
close the door and press Start/
Reload .
Crease-removal programs run for
approx. 45 minutes on average.
They may run for longer at low
ambient temperatures; at high
ambient temperatures, the run time
may be reduced.
There may be some extra noise
when a crease-removal program is
running.
Crease removal results may vary
depending on the type of fabric, the
amount of laundry and the selected
program. For best results, take the
laundry out of the machine as soon
as the program comes to an end,
hang it on a clothes hanger to finish
drying and reshape it while still
damp.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WT48XEH9GB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WT48XEH9GB in the language / languages: English as an attachment in your email.

The manual is 3.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info