790187
30
Zoom out
Zoom in
Previous page
1/76
Next page
en Overview of programmes
30
0 Settings
Program setting Function
Note: Not all settings can be activated in every program. The activated settings are displayed on the but-
tons or on the display. You can change or deactivate the activated settings by repeatedly pressing on the
relevant buttons.
Remote Start }Pressing Remote Start } allows you to start the appliance remotely via the
Home Connect app or to call up the Home Connect settings.
Notes
Please observe the instructions for the ambient temperatures
~ Page 72.
Remote start can only be activated if the appliance door is closed and the
appliance is connected to your home network.
Remote start is deactivated for safety reasons in the following circum-
stances:
Open the door,
Power failure,
Press Start/Reload on the appliance,
Briefly press Remote Start again,
Press # to switch off the appliance.
Drying Aim : The dryness level defines how damp or dry the laundry is after the pro-
gramme ends.
If you have set a dryness level, this is retained even after the appliance has
been switched off for the relevant programme. Exception: The settings are
not saved for Cottons.
¾ (Cupboard dry extra) Multi-layered, thick laundry that does not dry readily.
» (Cupboard dry) Normal, single-layered laundry.
Ø (Iron dry) Normal, single-layered laundry that still needs to be damp after drying and is
suitable for ironing or hanging up.
Less Ironing The drum moves the laundry at regular intervals after drying to prevent creas-
ing. You can activate or deactivate the automatic Anti-Crease function for the
indicated duration in minutes.
Ready In Before starting the programme, you can delay the time at which the pro-
gramme ends by up to 24 hours using c and b.
The set time in hours, e.g. 8 h, is shown in the display and counts down until
the programme starts. Once the programme has started, the programme
duration is displayed.
Note: Observe the information about the ambient temperatures
~ Page 72.
ü The drying time for timed programmes can be extended in 10-minute
increments using c and b.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WT48XEH9GB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WT48XEH9GB in the language / languages: English as an attachment in your email.

The manual is 3.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info