790195
38
Zoom out
Zoom in
Previous page
1/56
Next page
en Operating the appliance
38
Starting the programme
Touch and hold Start Reload button for
1~2 seconds, then release the button.
The programme starts and the
appliance door is locked.
The finish-in time is shown in the display
panel and counts down until the
programme starts. After the programme
has started, the programme duration is
displayed. And the symbols for the
programme progress are lighting up.
Childproof lock
You can lock the appliance to prevent
the settings you have set from being
changed inadvertently. To do this,
activate the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the varioSpeed and Ready in/
Time Dry buttons for 3 seconds. The
symbol w lights up in the display
panel.
w lights up: The childproof lock is
activated.
w flashes: If the programme and
programme settings are adjusted
while childproof lock is activated.
Note: When the programme ends, “Ÿš
is displayed. The door is unlocked. w
symbol remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the varioSpeed and
Ready in/Time Dry buttons until the
symbol w disappears.
Adding/removing laundry
After starting the programme (only for
washing), you can add or remove
laundry if necessary.
Touch the Start Reload button. The
appliance checks whether reloading is
possible.
If the following appears on the display
panel:
The symbol Õ disappears,
reloading is possible.
The symbol Õ lights up, reloading is
not possible.
To continue the programme, touch the
Start Reload button. The programme
continues automatically.
Notes
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1. Touch the Start Reload button.
2. Select another programme.
3. And touch the Start Reload button
again. The new programme starts
from the beginning.
Note: If drying is activated, after
touching the Start Reload button, when
the •©£ is displayed, waiting for the
appliance running to cool down the
laundry till the •©£ disappears, then
select another programme.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WN44G290GB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WN44G290GB in the language / languages: English as an attachment in your email.

The manual is 2.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info