626180
27
Zoom out
Zoom in
Previous page
1/44
Next page
Appliance settings en
27
If swallowed accidentally, seek medical
advice.
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Notes
When dosing all detergents,
cleaning aids and cleaning agents,
always follow the manufacturer's
instructions.
If dosing detergent manually, do not
add additional detergent to the
intelligent dosage dispenser (set
intelligent dosage to "off" ö). This will
prevent overdosing and foaming.
Dilute viscous fabric softener and
fabric conditioner with water to
prevent blockages.
Dosing and adding detergent:
1. Pull out the detergent drawer.
2. Add the correct dosage to
compartment É È depending on:
Soiling
Water hardness (ask your water
supply company)
The amount of laundry
The manufacturer's instructions
3. Close the detergent drawer.
Q Appliance settings
Appliance settings
You can change the following settings:
The volume of the buttons and the
information signals (e.g. at the end
of the programme)
Select/deselect the appliance's
automatic switch-off function
~ Page 7
Switch the drum-care information
signal on/off (depending on the
model). From ~ Page 14 onwards
You will need to activate the setting
mode in order to change these settings.
Activating the setting mode
1. Press the # button.
The appliance is switched on and
the Cottons programme is shown at
position 1.
2. Press the Temperature button and,
at the same time, turn the
programme selector clockwise to
position 2. Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel.
You can now change the settings:
Changing the signal volume
Use the Finish in 0 + or - button to
change the following settings at the
corresponding programme selector
positions:
2: The volume of the information
signals and/or
3: The volume of the button signals.
3RVLWLRQV
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WM14T640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WM14T640 in the language / languages: English as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens WM14T640

Siemens WM14T640 User Manual - German - 42 pages

Siemens WM14T640 User Manual - Dutch - 42 pages

Siemens WM14T640 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info