586204
19
Zoom out
Zoom in
Previous page
1/32
Next page
Cleaning and maintenance en
19
Detergent solution pump
blocked
:Warning
Risk of scalding!
Washing water is hot when washing at
high temperatures. If you come into
contact with the hot detergent solution,
you may be scalded.
Allow the detergent solution to cool
down.
1. Turn off the water tap so that no
more water can flow in and has to be
drained via the detergent solution
pump.
2. Switch off the appliance and pull out
the mains plug.
3. Open and remove the service flap.
4. Fold out the water gutter in front of
the pump cover.
5.
Remove the drainage hose from
its holder and remove the sealing
cap.
Allow the detergent solution to
flow out into a suitable container.
Replace the sealing cap on the
drainage hose and place the
drainage hose back in the
retainer.
Without the drainage hose
Carefully turn the pump cover
once through 180°, but do not
remove it. The water now runs out
of the detergent solution pump.
Repeat the process until no more
detergent solution flows out.
6. Now carefully unscrew the pump
cover. Residual water may run out.
Clean the interior, pump cover
thread and pump housing. The
impeller in the detergent solution
pump must be able to rotate.
Refit the pump cover and screw it on
tightly. The handle should be vertical.
7. Fold in the water gutter.
8. Place the service flap back on, lock
it into place, and close it.
Note: To prevent unused detergent
from flowing straight into the drain
during the next wash: Pour 2 litre of
water into compartment II and start the
Empty programme.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens WM14Q468 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens WM14Q468 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens WM14Q468

Siemens WM14Q468 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info