320371

Siemens vsz 42223 z4 0 parquet specialist Manual

14
Zoom out
Zoom in
Previous page
1/119
Next page
8
en
Disposal information
Packaging
The packaging is designed to protect the vacuum
cleaner from being damaged during transportation. It is
made of environmentally friendly materials and can be
recycled.
Dispose of packaging that is no longer required at an
appropriate recycling point.
Used vacuum cleaners
Used vacuum cleaners still contain many valuable
materials. Therefore, please take your used vacuum
cleaner to your retailer or recycling centre to be
recycled. For current disposal methods, please enquire
at your retailer or your local council.
Disposal of filters and dust bags
Filters and dust bags are made from environmentally
friendly materials.
As long as they do not contain substances that are not
permitted to be disposed of in the household rubbish,
you can dispose of them with your normal household
rubbish.
!
Please note
The mains socket must be protected by at least a 16
amp fuse.
If a fuse should blow when you switch on the appliance,
this may be because other electrical appliances which
have a high current draw are connected to the same
power circuit.
To prevent the fuse from blowing, select the lowest
power setting before switching the appliance on, and
increase the power only once it is running.
Fold out picture pages.
Before using for the first time
Figure
Push the handle onto the flexible hose until it
engages.
Figure
Push the crevice nozzle and upholstery nozzle back
into the accessories holder as illustrated.
Setting up
Figure
a)Push the flexible tube adapter into the air intake
opening in the vacuum cleaner lid until it engages
b)To remove the flexible hose, press the two lugs
together and pull the tube out.
Figure
a)Connect together the handle and
vacuuming/telescopic tube.
b)Push the handle into the telescopic tube until it
engages.
Press on the locking collar and pull out the
telescopic tube to disconnect.
Figure
a)Insert the suction pipe into the floor tool adapter.
b)Push the telescopic tube straight into the connecting
piece of the floor tool until it engages.
Press on the locking collar and pull out the
telescopic tube to disconnect.
Figure
a)Connect the suction pipes together.
b)Release the telescopic tube by moving the adjusting
sleeve/sliding switch in the direction of the arrow
and adjust the tube to the required length.
Figure
Holding the power cord by the plug, pull out the
required length and plug the plug into the mains
socket.
Figure Switching on/off
Ⅲ
Your appliance is fitted with a pop-out control
button.
Ⅲ
To switch on the appliance, press the control button
in the direction of the arrow down to the stop and
release. This will release and extend the controller.
8
7
6*
5*
4*
3
2*
1*
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens vsz 42223 z4 0 parquet specialist at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens vsz 42223 z4 0 parquet specialist in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info