73392
18
Zoom out
Zoom in
Previous page
1/156
Next page
12
de
Figure
Press the on/off button in the direction of the
arrow to switch your vacuum cleaner on/off.
Figure
Adjust the suction by turning the on/off
button in the direction of the arrow.
Set the power setting to maximum for the
best results when vacuuming.
Vacuuming
Figure
Adjust the adjustable floor tool:
Rugs and carpets =>
Hard floors/parquet =>
Figure Vacuuming with accessories
Attach the nozzles to the tube or handle as
required:
a) Crevice nozzle for vacuuming crevices and
corners, etc.
b) Upholstery nozzle for vacuuming upholstered
furniture, curtains, etc.
c) Hard furnishing brush
For cleaning window frames, cabinets,
mouldings, etc.
d) Hard-floor brush*
For vacuuming hard floors (parquet flooring,
laminate flooring, wooden floorboards, stone
floors, etc.)
Figure
Pet hair upholstery nozzle
For easy and thorough removal of pet hair
(attach to handle or suction pipe as required).
To clean the pet hair upholstery nozzle,
simply vacuum using the handle.
If it is very dirty, the pet hair upholstery nozzle
can also be opened.
To do this, turn the two screws on the sides
of the nozzle (e.g. using a coin) and remove
the inner part from the nozzle.
After cleaning, replace the inner part (make
sure it is correctly seated) and screw to the
housing.
11*
10*
9
8
7
Figure
You can use the parking aid on the back of
the vacuum cleaner if you wish to stop
vacuuming for a short time.
Once you have switched off the vacuum
cleaner, slide the catch on the floor tool into
the groove at the rear of the appliance.
Figure
To store or transport the vacuum cleaner, use
the storage aid on the underside of the
vacuum cleaner.
Stand the vacuum cleaner up on its end.
Slide the catch on the floor tool into the
groove on the underside of the appliance.
!
CAUTION: Do not operate in an
upright/vertical position.
Figure
The appliance can also be carried using the
carrying handle when vacuuming steps, for
example.
When the work is done
Figure
Unplug the vacuum cleaner.
Tug the power cord briefly and let go. The
cable then rewinds automatically.
Figure
Unlock the telescopic tube by moving the
sliding button in the direction of the arrow
and slide one tube into the other.
16*
15
14
13
12
*
Depending on equipment
en
Innenteil 206 921 A 29.01.2007 15:31 Uhr Seite 12
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens VS08G2499 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens VS08G2499 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info