473236

Siemens VS08G1668 Manual

12
Zoom out
Zoom in
Previous page
1/138
Next page
10
en
Fold out picture pages.
Setting up
Figure
a) Insert the flexible hose adapter into the air intake open-
ing and allow it to engage.
b) To remove the flexible hose, press the two lugs together
and pull the tube out.
Figure
a) Align and connect the handle and the telescopic tube.
b) Push the handle straight into the telescopic tube until it
engages.
To release the connection, squeeze the collar sleeve and
pull the handle out.
Figure
Ⅲ
Attach the carpet lifter to the nozzle.
Ⅲ
Press the carpet lifter sideways to engage.
Figure
a) Align and connect the floor tool and the telescopic tube.
b) Push the telescopic tube straight into the connecting
piece of the floor tool until it engages.
To release the connection, squeeze the locking collar
and pull the telescopic tube out.
Figure
Press the adjusting sleeve in the direction of the arrow
and adjust the telescopic tube to the length required.
Figure
Holding the power cord by the plug, pull out the required
length and plug the plug into the mains socket.
Figure
To switch your vacuum cleaner on and off, press the On/Off
button in the direction of the arrow.
7
6
5*
4*
3*
2*
1
Vacuuming
You have bought an extremely powerful device. The high-
est suction setting is therefore only recommended for
heavily soiled, short-pile carpets and hard floors.
Figure
The required suction power can be selected by adjusting the
suction regulator.
Ⅲ
Low
suction range:
For vacuuming delicate fabrics, e.g. curtains.
Ⅲ
Moderate
suction range:
For daily vacuuming of lightly soiled floors.
Ⅲ
High
suction range:
For vacuuming durable floor coverings, hard floors and
for heavily soiled surfaces.
Ⅲ
Turbo range:
For vacuuming stubborn dirt and very heavily soiled sur-
faces.
Figure
Adjusting the floor tool:
a) For vacuuming rugs and carpets =>
b) For vacuuming hard floors =>
Floor nozzle with carpet lifter*
Figure
When you pull the floor tool backwards, the rug is lifted,
allowing you to clean underneath its edge.
Vacuuming with accessories
Figure
Pull the 4 in 1 tool in the direction of the arrow to remove it
from the tool holder.
a) Crevice nozzle
For vacuuming in crevices and corners.
For difficult to reach places, the 4 in 1 tool can be
extended to two different lengths by pulling out the
crevice nozzle.
Ⅲ
For either length extension, pull the crevice nozzle out
until you hear it engage.
Ⅲ
The crevice nozzle can be pushed back in again by
releasing the telescopic locking mechanism (pressing it
in the direction of the arrow).
b) Upholstery nozzle
For cleaning upholstered furniture,
curtains, etc.
11
10*
9
8
*
Dependent on model
Innenteil 358 920 A 18.03.2008 15:10 Uhr Seite 10
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens VS08G1668 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens VS08G1668 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info