Manual Siemens vs06g2044 pure brush (page 21 of 156) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

316104

Zoom out

Zoom in

1/156

What kind of dirt can be vacuumed using the

vacuum cleaner?

All kinds of household dirt can be vacuumed

using the SX1. When vacuuming fine particles,

note that the motor protection filter, foam filter

and fluff filter must be cleaned at regular

intervals to guarantee the optimum function of

the vacuum cleaner.

Should the dust container be emptied after

each use of the vacuum cleaner?

The dust container should be emptied after each

use for hygiene reasons, or at the latest when

the maximum level (see the mark) is reached.

How often should filter cartridges and motor

protection filters be cleaned/rinsed out?

Ideally, the filters should be cleaned after each

use, especially after vacuuming fine particles,

either by tapping or rinsing, depending on the

level of dirt.

The motor protection filter, foam filter and fluff

filter must be cleaned at the latest when the

maximum level (see max. marking on dust

container) has been reached.

How often should the washable exhaust filter

be cleaned/rinsed?

The washable exhaust filter should be cleaned

regularly for hygiene reasons by tapping the

dust out and must be rinsed through at least

once every 6 months (or washed in the washing

machine at 40°C).

What is the best way to transport my vacuum

cleaner?

The SX1 can be transported easily using the

ergonomic carrying handle, e.g. for vacuuming

the stairs. It is best to hold/carry the tube with

the floor tool in the other hand.

Frequently asked questions

Troubleshooting small problems

Problem

Suction power

becomes noticeably

weaker

Bottom flap of the

dust container

does not close

Cause

The filter cartridge /

motor protection filter

is heavily soiled.

The nozzle is blocked

The hose / telescopic

tube is blocked.

The hose / handle

is blocked

The dust separator

is blocked

The dust separator

joint is blocked

The bottom flap

is soiled

Solution

Clean the motor protection filter, fluff filter and foam

filter by tapping out the dust or rinsing (Fig. 17, 21-23).

Caution: After rinsing, replace the motor protection

filter, foam filter and fluff filter only once they are

completely dry (after approximately 24 hours).

Vacuum the nozzle, e.g. using the crevice nozzle

Slide the telescopic tube together and separate the

suction pipe sections.

Loosen and remove the blockage.

Separate the hose from the vacuum cleaner and handle

Loosen and remove the blockage.

Remove the twist-lock cover from the dust separator,

loosen and remove the blockage. Clean the dust

separator with a damp or dry cloth if necessary.

Replace the twist-lock cover (Fig. 26, 27)

Detach the dust separator from the vacuum cleaner,

remove the blockage and click the joint back into the

vacuum cleaner (Fig. 28).

Clean the bottom flap, e.g. with a damp or dry cloth.

When closing the flap, ensure that it is fitted correctly.

Innenteil 206 921 A 29.01.2007 15:31 Uhr Seite 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens vs06g2044 pure brush in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens vs06g2044 pure brush Manual

Product: