Manual Siemens vs01e2010 (page 16 of 119) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

316176

Zoom out

Zoom in

1/119

Cleaning the motor protection filter

The motor protection filter should be cleaned regularly by

knocking out the dirt or rinsing it out.

Figure

Ⅲ

Open the dust bag compartment lid

(see Figure 19).

Ⅲ

Pull out the motor protection filter in the direction of the

arrow.

Ⅲ

Clean the motor protection filter by tapping it.

Ⅲ

If it is very dirty, the motor protection filter should be

rinsed out.

The filter must then be left to dry for at least 24 hours.

Ⅲ

After cleaning, slide the motor protection filter into the

vacuum cleaner and close the dust bag compartment lid.

Replacing the micro-hygiene filter

This should be replaced with every replacement filter pack

Figure

Ⅲ

Open the dust bag compartment lid

(see Figure 19).

Ⅲ

Release the filter holder by moving the locking lever in

the direction of the arrow.

Ⅲ

Remove the micro-hygiene filter. Insert the new micro-

hygiene filter into the vacuum cleaner.

Ⅲ

Insert the filter holder into the vacuum cleaner and clip

into place.

Replacing the micro active carbon filter

If your vacuum cleaner is equipped with a micro active

carbon filter, this should be replaced every six months.

Figure

Ⅲ

Open the dust bag compartment lid

(see Figure 19).

Ⅲ

Release the filter holder by moving the locking lever in

the direction of the arrow.

Ⅲ

Remove the micro active carbon filter.

Ⅲ

Insert the new micro active carbon filter.

Ⅲ

Insert the filter holder into the vacuum cleaner and clip

into place.

Replacing the HEPA filter

If your vacuum cleaner is equipped with a HEPA filter, this

should be replaced once a year.

Figure

Ⅲ

Open the dust bag compartment lid (see Figure 19).

Ⅲ

Release the Hepa filter by moving the locking lever in the

direction of the arrow and remove it from the vacuum

cleaner.

Ⅲ

Insert the new HEPA filter and clip into place.

If you have used the vacuum cleaner for vacuuming fine

dust particles, clean the motor protection filter and, if

necessary, replace micro hygiene filter, the micro active

carbon filter or Hepa filter.

Care

Always switch off the vacuum cleaner and disconnect the

power cord from the mains before cleaning the appliance.

The vacuum cleaner and plastic accessories can be

cleaned with a commercial plastic cleaner.

Do not use a scourer, glass-cleaning agent or all-

purpose cleaning product. Never immerse the

vacuum cleaner in water.

The dust compartment can, if necessary, be cleaned with a

second vacuum cleaner or simply wiped with a dry cloth or

dusting brush.

Subject to technical modifications.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens vs01e2010 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens vs01e2010 Manual

Product: