72832
13
Zoom out
Zoom in
Previous page
1/130
Next page
11
en
Figure
Put the dust bag back into the vacuum
cleaner and close the dust bag compartment
lid.
!
Caution: The inside of the dust container
may become scratched with use and start
to look opaque. This does not, however,
affect the performance of the vacuum
cleaner in any way, i.e. it will continue to
function as normal.
Cleaning the permanent filters and
micro filters in the dust container
The filters must be cleaned:
After any operating malfunctions, i.e. after a
blockage is cleared.
At least every six months.
Figure
Press the fastener on the rear side of the
container and remove the micro filter from the
bottom of the container.
Remove the permanent filter from the bottom
plate of the container.
Figure
Wash the micro- and permanent filters.
The filter must then be left to dry for at least
24 hours.
After cleaning, place the permanent filter on
the bottom plate of the container.
Put the micro filter onto the container and fix
it in place by pushing in the direction of the
arrow. You will hear the flap snap shut.
21
20
19
Blockages
Removing a blockage in the dust container.
Figure
Empty the container (see figure 18)
Loosen the blockage, e.g. with a screwdriver,
and tap or vacuum it out.
(You must fit a dust bag in the vacuum
cleaner before vacuuming it out - see
Figure 23)
Close the bottom flap so that it can be heard
snapping into position.
!
Caution: The micro- and permanent filters
must be cleaned following any operating
problem (see Figure 20 and 21).
Using dust bags
If necessary, a dust bag may be used instead of
the dust collector.
Part number on the spare filter packaging:
VZ52AFG1
Figure
Open the vacuum cleaner lid (see Figure 16)
Remove the dust collector and insert a dust
bag.
Close the vacuum cleaner lid.
You have bought an extremely powerful device.
The highest suction setting is therefore only
recommended for heavily soiled, short-pile
carpets and hard floors.
The required suction power can be selected by
adjusting the suction regulator (see Figure 8).
Low suction range:
For vacuuming delicate fabrics, e.g. curtains.
Middle suction range:
For daily vacuuming of lightly soiled floors.
High suction range:
For vacuuming durable floor coverings, hard
floors and for heavily soiled surfaces.
23
22
Innenteil 203 689 B 19.01.2007 9:34 Uhr Seite 11
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens VS 04 G 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens VS 04 G 2200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info