Manual Siemens vs 01 e 2100 (page 13 of 104) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

321202

Zoom out

Zoom in

1/104

deen

Please note

The mains socket must be protected by at least a 16

amp fuse.

If a fuse should blow when you switch on the

appliance, this may be because other electrical

appliances which have a high current draw are

connected to the same power circuit.

To prevent the fuse from blowing, select the lowest

power setting before switching the appliance on, and

increase the power only once it

is running.

Fold out the picture pages.

Before using for the first time

Figure

Push the handle onto the flexible hose until it

engages.

Figure

Push the crevice nozzle and upholstery nozzle into

the accessories holder as illustrated.

Setting up

Figure

a)Push the flexible tube adapter into the air intake

opening in the vacuum cleaner lid until it engages.

b)To remove the flexible hose, press the two lugs

together and pull the hose out.

Figure

a)Connect the handle and the telescopic tube together.

b)Push the handle into the telescopic tube until

it engages.

Press on the locking collar and pull out the

telescopic tube to disconnect.

Figure

a)Connect the floor tool and the telescopic tube

together.

b)Push the telescopic tube straight into the connecting

piece of the floor tool until it engages.

Press on the locking collar and pull out the

telescopic tube to disconnect.

Figure

To adjust the length of the telescopic tube, adjust

the adjusting sleeve/sliding switch in the direction of

the arrow and adjust the tube to the required length.

Figure

Holding the power cord by the plug, pull out the

required length and plug it into the mains socket.

Figure

Press the ON/OFF button in the direction of the

arrow to switch your vacuum cleaner on/off.

Figure

Adjust the suction by turning the ON/OFF button in

the direction of the arrow.

Vacuuming

Figure

Adjusting the floor tool:

Rugs and carpets =>

Hard floors =>

Figure

Remove the upholstery nozzle and crevice nozzle

from the accessories holder as illustrated.

Figure

Vacuuming with accessories

Attach the nozzles to the suction pipe or handle as

required:

a)Crevice nozzle for vacuuming crevices and corners,

etc.

b)Upholstery nozzle for vacuuming upholstered

furniture, curtains, etc.

Figure

After use, push the crevice nozzle and upholstery

nozzle back into the accessories holder as indicated.

Figure

Pet hair tool

Floor tool for easy and thorough vacuuming of pet

hair. To clean the nozzle, simply vacuum it using the

suction pipe/telescopic tube

Turbo brush

If your appliance is equipped with a turbo brush,

please consult the accompanying instruction manual

for notes on its use and maintenance.

Hard-floor brush

Figure

For vacuuming hard floor coverings (tiles, parquet

flooring, etc.)

Cleaning the hard-floor brush

Figure

a)Vacuum from below to clean the brushes.

b)Cut through threads and hairs wound round the

rollers using scissors.

Vacuum threads and hairs with the crevice nozzle.

Figure

You can use the parking aid on the side of the

vacuum cleaner if you wish to stop vacuuming for a

short time.

Once you have switched off the vacuum cleaner,

slide the catch on the floor tool into the groove on

the side of the appliance.

16*

15*

14*

12*

Dependent on model

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens vs 01 e 2100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens vs 01 e 2100 Manual

Product: