Manual Siemens vr 41 a 30 converto (page 15 of 119) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

316761

Zoom out

Zoom in

1/119

Ⅲ

To switch off the appliance, press the control button

in again down to the stop. This will leave the control

button retracted in the appliance.

Figure Controlling the suction level

The required suction level can be set to any level

required by turning the control knob in the direction

of the arrow.

Ⅲ

Low suction range =>

For vacuuming delicate fabrics,

e.g. curtains.

Ⅲ

Medium suction range =>

For daily vacuuming of lightly

soiled floors.

Ⅲ

High suction range =>

For vacuuming durable floor

coverings,

hard floors and for heavily soiled surfaces.

Vacuuming

Figure

Adjusting the floor tool:

Ⅲ

Rugs and carpets =>

Ⅲ

Hard floors =>

Figure

Remove the upholstery nozzle and crevice nozzle

from the accessories holder as illustrated.

Figure Vacuuming with accessories

Attach the nozzles to the tube or handle as required:

a)Crevice nozzle for vacuuming crevices and corners,

etc.

b)Upholstery nozzle for vacuuming upholstered

furniture, curtains, etc.

c)Hard furnishings brush

For cleaning window frames, cabinets, mouldings,

etc.

Figure

After use, push the crevice nozzle and upholstery

nozzle back into the accessories holder as indicated.

Hard-floor brush

Figure

For vacuuming hard floor coverings (tiles, parquet

flooring, etc.)

Push the telescopic tube into the connecting piece

of the hard-floor brush until it engages.

Press on the locking collar and pull out the telescop-

ic tube to disconnect.

14*

12*

Cleaning the hard-floor brush

Figure

a)Vacuum from below to clean the brushes.

b)Cut through threads and hairs wound round the

rollers using scissors.

Vacuum threads and hairs with the crevice nozzle.

Turbo brush

If your vacuum cleaner is equipped with a turbo brush,

please consult the accompanying instruction manual

for notes on its use and maintenance.

Figure

You can use the parking aid on the back of the

vacuum cleaner if you wish to stop vacuuming for a

short time.

Once you have switched off the vacuum cleaner,

slide the catch on the floor tool into the recess on

the rear of the appliance.

Figure

The appliance can also be carried using the carrying

handle when vacuuming steps, for example.

When the work is done

Figure

Unplug the vacuum cleaner.

Tug the power cord briefly and let go. The cable then

rewinds automatically.

Figure

To store/ transport the vacuum cleaner, use the

storage aid on the underside of the vacuum cleaner.

Stand the vacuum cleaner up on its end. Slide the

catch on the floor tool into the groove on the

underside of the appliance.

Changing the dust bag and filters

Replacing the dust bag

Figure

a)If the dust bag change indicator is completely yellow

when the floor tool is lifted from the floor and the

highest suction power is selected, the dust bag must

be changed, even if it is not yet full. In this case it is

essential to change the dust bag due to the type of

material it contains.

First check that the nozzle, suction pipe and flexible

hose are not blocked, as this would also lead to the

dust bag change indicator being triggered.

b)The handle can easily be detached from the hose to

remove blockages.

20*

15*

Dependent on model

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens vr 41 a 30 converto in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens vr 41 a 30 converto Manual

Product: