73388
21
Zoom out
Zoom in
Previous page
1/156
Next page
15
de
What kind of dirt can be vacuumed using the
vacuum cleaner?
All kinds of household dirt can be vacuumed
using the SX1. When vacuuming fine particles,
note that the motor protection filter, foam filter
and fluff filter must be cleaned at regular
intervals to guarantee the optimum function of
the vacuum cleaner.
Should the dust container be emptied after
each use of the vacuum cleaner?
The dust container should be emptied after each
use for hygiene reasons, or at the latest when
the maximum level (see the mark) is reached.
How often should filter cartridges and motor
protection filters be cleaned/rinsed out?
Ideally, the filters should be cleaned after each
use, especially after vacuuming fine particles,
either by tapping or rinsing, depending on the
level of dirt.
The motor protection filter, foam filter and fluff
filter must be cleaned at the latest when the
maximum level (see max. marking on dust
container) has been reached.
How often should the washable exhaust filter
be cleaned/rinsed?
The washable exhaust filter should be cleaned
regularly for hygiene reasons by tapping the
dust out and must be rinsed through at least
once every 6 months (or washed in the washing
machine at 40°C).
What is the best way to transport my vacuum
cleaner?
The SX1 can be transported easily using the
ergonomic carrying handle, e.g. for vacuuming
the stairs. It is best to hold/carry the tube with
the floor tool in the other hand.
Frequently asked questions
en
Troubleshooting small problems
Problem
Suction power
becomes noticeably
weaker
Bottom flap of the
dust container
does not close
Cause
The filter cartridge /
motor protection filter
is heavily soiled.
The nozzle is blocked
The hose / telescopic
tube is blocked.
The hose / handle
is blocked
The dust separator
is blocked
The dust separator
joint is blocked
The bottom flap
is soiled
Solution
Clean the motor protection filter, fluff filter and foam
filter by tapping out the dust or rinsing (Fig. 17, 21-23).
Caution: After rinsing, replace the motor protection
filter, foam filter and fluff filter only once they are
completely dry (after approximately 24 hours).
Vacuum the nozzle, e.g. using the crevice nozzle
Slide the telescopic tube together and separate the
suction pipe sections.
Loosen and remove the blockage.
Separate the hose from the vacuum cleaner and handle
Loosen and remove the blockage.
Remove the twist-lock cover from the dust separator,
loosen and remove the blockage. Clean the dust
separator with a damp or dry cloth if necessary.
Replace the twist-lock cover (Fig. 26, 27)
Detach the dust separator from the vacuum cleaner,
remove the blockage and click the joint back into the
vacuum cleaner (Fig. 28).
Clean the bottom flap, e.g. with a damp or dry cloth.
When closing the flap, ensure that it is fitted correctly.
Innenteil 206 921 A 29.01.2007 15:31 Uhr Seite 15
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens VK20A02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens VK20A02 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info