680394

Siemens Unify OpenStage 60 T Manual

146
Zoom out
Zoom in
Previous page
1/156
Next page
146 Fixing problems
Possible cause 2:
If "Clear LED support" appears on the menu:
you tried to program a station number without LED display or an external station
number on a key that already is already programmed with an internal phone
number with LED display.
Possible reactions:
Confirm "Clear LED support" to save the station number. The existing internal
station number remains on the other layer without LED display.
Contact partner in the case of problems
Contact your service personnel if a fault persists for more than five minutes, for
example.
Troubleshooting
Pressed key does not respond:
Check if the key is stuck.
Telephone does not ring:
Check whether the "Do not disturb" function is activated on your telephone ("Do
not disturb" appears on the screen
Page 23). If so, deactivate it.
You cannot dial an external number:
Check whether you telephone is locked ("Not authorized" appears on the
screen). If the phone is locked, enter your PIN to unlock it
Page 92.
To correct any other problems:
First contact the relevant service personnel. If the service personnel are unable
to correct the problem, they must contact Customer Service.
Caring for your telephone
• Never allow the telephone to come into contact with coloring, oily or aggres-
sive agents.
• Always use a damp or antistatic cloth to clean the telephone. Never use a dry
cloth.
• If the telephone is very dirty, clean it with a diluted neutral cleaner containing
surfactants, such as a dish detergent. Afterwards remove all traces of the
cleaner with a damp cloth (using water only).
• Never use aggressive or alcohol-based cleansers on plastic parts. The use of
scouring agents is also forbidden.
… 146 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Unify OpenStage 60 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Unify OpenStage 60 T in the language / languages: English as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info