680394

Siemens Unify OpenStage 60 T Manual

103
Zoom out
Zoom in
Previous page
1/156
Next page
More functions/services 103
Communicating with PC applications over a
CSTA interface
If configured (contact your service personnel), you can use your phone to com-
municate with PC applications (CSTA = Computer Supported Telecommunica-
tions Applications). You send information to the application and receive informa-
tion from the application, for example, via your phone display.
S Press the "Data I/O" key, key programming Page 71.
j Enter the three-digit ID for the application you wish to control.
e, 0...9 Use the TouchGuide and the keypad for communication with the application.
Temporarily interrupting communication with the application
^ The phone is ringing. You answer the call.
T The LED on the "Data I/O" key flashes: Communication to the application is au-
tomatically interrupted.
Resuming communication with the application
T Press the flashing "Data I/O" key. The LED lights up.
Ending communication with the application
Select and confirm the relevant CSTA message.
or
^ \ Lift the handset and replace it again.
Controlling relays (only for HiPath 3000)
If this function has been configured (contact your service personnel), you can
use up to
four relays to enable/disable different devices (such as a door opener).
Depending on how you program the relays, you can activate and deactivate
them manually them or configure them to activate and deactivate automatically
(after timeout).
Select and confirm the option shown,
or
select and confirm the option shown.
1...4 Enter the relay.
Sensors (HiPath 33x0/35x0 only)
If configured (consult your service personnel), sensors are able to recognize sig-
nals, call your phone, and display an appropriate message on the screen.
Special features must be taken into consideration if your telephone oper-
ates with HiPath 5000 (system networking via PC network) Page 103!
Control Relay On
Control Relay Off
… 103 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Unify OpenStage 60 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Unify OpenStage 60 T in the language / languages: English as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info