Manual Siemens Unify OpenStage 60 T (page 57 of 156) (English)

680394

Zoom out

Zoom in

1/156

Enhanced phone functions 57

Parking a call

You can park up to ten calls, either internal, external, or both. Parked calls can

be displayed on and picked up from another telephone. This feature is useful if

you want to continue a call at another phone.

Prerequisite: You are conducting a call.

v Open the Program/Service menu  Page 36.

Select and confirm the option shown.

0 ... 9 Enter the number of the park slot (0 - 9) and make a note of it. If the park slot

number you entered is not displayed, it is already in use; enter another one.

Retrieving a parked call

Prerequisite: One or more calls have been parked. The phone is idle.

v Open the Program/Service menu  Page 36.

Select and confirm the option shown.

Select and confirm the option shownSelect and confirm the option shown

.

0 ... 9 Enter the park slot number you noted earlier.

If the park slot number you enter is not in use, you cannot retrieve the call.

Calls g

Park a call

Calls g

Retrieve call

1. ”Differing display view in a HiPath 4000 environment”  Seite 144

If a parked call is not picked up, after a specific period of time the call is re-

turned to the telephone from where it was parked (recall).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Unify OpenStage 60 T in the language / languages: English as an attachment in your email.

The manual is 3,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens Unify OpenStage 60 T Manual

Product: