680394

Siemens Unify OpenStage 60 T Manual

12
Zoom out
Zoom in
Previous page
1/156
Next page
12 General information
Intended use
The OpenStage phone was designed as a device for voice transmission and should be used on a
desk. Any other use is regarded as unauthorized.
Telephone type
The identification details (exact product designation and serial number) of your telephone can be
found on the nameplate on the underside of the base unit. Specific details concerning your com
-
munications platform can be obtained from your service technician.
Please have this information ready when you contact our service department regarding faults or
problems with the product.
Speakerphone quality and display legibility
• To ensure good speakerphone quality, the area in front of the telephone (front right) should be
kept clear.
The optimum handsfree distance is 20 in. (50 cm).
• Proceed as follows to optimize display legibility:
– Turn the phone to tilt the display. This ensures you have a frontal view of the display while
eliminating light reflexes.
Multi-line telephone, executive/secretary functions
Your OpenStage 60/80 T is a "multi-line telephone". This means that your service personnel can
configure multiple lines on your phone, which is not the case with single-line phones. Each line is
assigned an individual phone number which you can use to make and receive calls.
The programmable sensor keys function as line keys on multi-line phones Page 106.
When using a multi-line phone to make and receive calls, certain particulars must be taken into
account Page 107 ff.
The executive-secretary configuration is a special case. This is a multi-line telephone with special
features (e.g.
"Ring Transfer" and "Accept call"), configured especially for executive/secretary use
Page 105 ff.
Team functions
To increase the efficiency of telephony, your service personnel can configure various Team func-
tions such as pickup groups, hunt groups, and call distribution groups.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Unify OpenStage 60 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Unify OpenStage 60 T in the language / languages: English as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info