680309

Siemens Unify OpenStage 15 T Manual

32
Zoom out
Zoom in
Previous page
1/38
Next page
32 Examples and HowTos
optiPoint Compatible Mode (V2R0)
Some older versions of HiPath 3000 will not identify OpenStage TDM phones correctly. To over-
come this restriction, OpenStage 10 T / 15 T / 30 T phones with firmware from V2R1 onwards can
be switched to an optiPoint500 compatible mode. In optiPoint mode, the phone changes its
Phone-ID to that of a corresponding optiPoint model, e.
g. an OpenStage 10 T will adopt the
Phone-ID of an optiPoint500 Entry. For a complete reference, see the following table:
Switching Procedure for OpenStage 15 / 30
1.Press the menu button N for at least 5 seconds.
2.The menu LED starts flashing and the phone mode selection menu is shown on the display. The
currently active phone mode is marked.
3.When pressing the up m or down l key, the second, currently inactive, mode is shown.
4.Press the i key to select the optiPoint mode.
5.Press the i key again to confirm the selection and activate optiPoint mode.
6.After 5 seconds the phone performs a restart and comes up in the new operating mode.
Switching Procedure for OpenStage 10
The operating mode of an OpenStage 10 phone is changed via the 3 function keys.
1.Initially, all 3 LEDs of the function keys are off. Press the rightmost function key for at least 5
seconds.
2.The current active phone operating mode will be indicated by the LED on one of the other two
function keys. When OpenStage mode is active, the middle LED glows, whereas in optiPoint
mode, the leftmost LED glows.
OpenStage Mode:
optiPoint Mode:
OpenStage 10 T <-> optiPoint500 Entry
OpenStage 15 <-> optiPoint 500 Standard
OpenStage 30 <-> optiPoint500 Advance
Phone Operating Mode:
[*] OpenStage
f
Phone Operating Mode:
[ ] OptiPoint
f
OptiPoint Operating Mode
Save and Restart
f
OptiPoint Operating Mode
Saved successfully!
f
S S S
S R S
R S S
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Unify OpenStage 15 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Unify OpenStage 15 T in the language / languages: English as an attachment in your email.

The manual is 8,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Unify OpenStage 15 T

Siemens Unify OpenStage 15 T User Manual - Dutch - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info