Manual Siemens TW86103P (page 10 of 94) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

709422

Zoom out

Zoom in

1/94

Congratulations on purchasing this

Siemens appliance. You have acquired

a high-quality product that will bring

you a lot of enjoyment.

Parts and operating

controls

1 Kettle (with water level indicator)

2 Lid

3 Lid release button

4 ON/OFF O switch

5 Temperature indicator (illuminated)

6 + – button (temperature setting)

7 U button (keep warm)

8Limescalelter(removable)

9 Base

10 Cable tidy

Important: Use the kettle 1 only with its

included base 9.

●Only ll the kettle with water. Milk and

instant beverages will burn and damage

the appliance. Never operate the kettle

1withoutwateranddonotoverllit;

observe the min and max markings.

If the kettle is too full, the water will boil

over!

Before using

for the rst time

● Removeanystickersorlm.

● Unroll the right amount of cable from the

cable tidy 10 and plug it in.

● Fill the kettle 1 with water. Bring the water

to a boil and discard it. Repeat the proce-

dure. This will make sure that the kettle is

clean for normal use.

● When the water comes to a boil for the

rsttime,addatablespoonofwhite

vinegar.

Boiling water

● Fill the kettle with fresh water through the

spout or the open lid 2 (press lid release

button 3).

● Check the amount by reading the water

level indicator markings (min and max).

● Close the lid 2 until it locks and place the

kettle 1 on the base 9.

● Press the O ON/OFF switch 4. The

kettle emits a signal, and the factory-set

temperature (100°C) lights up. The water

is being heated.

● By pressing button 6 + or – you can set

thetemperaturetoca.70°C,ca.80°C,

ca. 90°C or ca. 100°C.

● When the water has reached the selected

temperature, the kettle will switch off

automatically, the temperature indicator 5

goes off, and a signal sounds.

Note: The selected temperature can be

changed at any time while the kettle is

heating up. While the kettle heats up, the

current temperature lights up; the preset

temperatureashesuntilithasbeen

reached.

If the temperature cannot be set, this indi-

cates that the water in the kettle is hotter

than the desired temperature. The current

temperature will light up.

You can turn off the kettle at any time by

pressing the O ON/OFF switch 4 again.

Warning: If you remove the kettle 1 from

the base and replace it before the heating

process is over, the kettle will not continue

to heat the water. The selected settings will

be lost (reset to factory setting).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TW86103P in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens TW86103P Manual

Product: