788384
30
Zoom out
Zoom in
Previous page
1/252
Next page
en Troubleshooting
30
Fault Cause and troubleshooting
Coffee is too acidic. Use a coffee variety with a higher proportion of Ro-
busta beans.
Use beans with a darker roast.
Coffee is too bitter. Grinding level is set too fine.
Set a coarser grinding level.
→"Adjusting the grinding level", Page17
Type of coffee is not optimal.
Change the coffee variety.
Coffee tastes burnt. Grinding level is set too fine.
Set a coarser grinding level.
→"Adjusting the grinding level", Page17
Type of coffee is not optimal.
Change the coffee variety.
Coffee temperature setting is too high.
Set the coffee temperature lower.
Coffee grounds are
not compact and are
too wet.
The grinding level is not set optimally.
Adjust the grinder to a coarser or finer setting.
→"Adjusting the grinding level", Page17
Beans are too oily.
Use a different type of bean.
Display shows "Please
insert brewing unit.". Cover is wrongly inserted.
1. Check whether the brewing unit is inserted correctly
and is securely locked.
2. Push the red lever up to the left.
3. Insert the brewing unit cover.
Display shows "Please
fill water tank." despite
the fact that the water
tank is full.
Water tank is wrongly inserted.
Insert the water tank correctly.
Carbonated water is in the water tank.
Fill the water tank with fresh tap water.
Float is stuck in the water tank.
1. Remove the water tank.
2. Clean the water tank thoroughly.
New water filter was not rinsed as per instructions.
1. Rinse the water filter according to the instructions.
2. Place the water filter into operation.
Air is in the water filter.
1. Immerse the water filter in water with the opening
facing upwards until no more air bubbles escape.
2. Reinsert the filter.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TQ707R03 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TQ707R03 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 15.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info