111260

Siemens TK 911 N2 FR Manual

28
Zoom out
Zoom in
Previous page
1/108
Next page
24
Visual alert
The fl oat in drip tray
11
or
12
repectively becomes visible.
During the rinsing procedure, when preparing coffee
and drawing steam, a certain amount of water will
collect in the drip trays. As soon as these are full, the
fl oat rises (Fig. 6). Once the fl oat becomes visible, the
corresponding drip tray must be emptied.
● Remove the small drip tray
11
● Pull the large drip tray
12
forwards.
● Remove the capsule container
13
.
● Empty the drip trays and clean them using a little
detergent solution.
● Mount the capsule container
13
on the large drip tray
12
, and push back into position.
● Insert small drip tray
11
.
What if something goes wrong?
The blue illuminated ring
1b
does not light up.
Check the power supply (possible power outage) and
that the ON/OFF switch
17
is set to
I
.
It is impossible to heat water
or generate steam.
Nozzle
10
is blocked up.
Clean nozzle
10
using a detergent solution and a
blunt needle.
Not enough milk froth is being
produced, or it is too runny.
● The frothing attachment
9
is blocked. Wash with a
mild detergent solution, as directed.
● Use cold milk with a fat content of at least 1.5 %.
Message in display
Please fill water
despite a full water tank
After the water tank has been fi lled, no coffee has yet
been served.
Press
g
(hot water).
Water is dripping from the
steam pipe
7
.
● Place a vessel under nozzle
10
.
Press button
g
(hot water), and draw off a little water.
● Finally press
g
once again.
The window
2
opens but will
not close.
● Set the ON/OFF switch
17
to
0
. After approx. 5 sec.,
switch to
I
once more.
● If the window does not move, or opens and fails to
close properly, it can be carefully slid shut by hand.
During the descaling
procedure, no liquid runs
out out of nozzle
10
into the
collecting vessel.
● Break off the descaling procedure with the button
a
(Stand by). Remove the nozzle
10
and the adapter
8
,
and clean them thoroughly (scale residue). Refi t both
parts and repeat the descaling procedure from the
start as directed.
en
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TK 911 N2 FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TK 911 N2 FR in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info