111260

Siemens TK 911 N2 FR Manual

24
Zoom out
Zoom in
Previous page
1/108
Next page
20
Manual
= on each occasion the display
tex
t Launch rinsing cycle
appears.
In this case, check that all drip trays are in
place, and press button f (large cup); the
appliance is rinsed.
Reset
Yes
serves to reset all settings changed in
programming mode and any changes to the
liquid quantity are reset to the original ex
works values.
Care and daily cleaning
!
Danger of electric shock!
Before cleaning, unplug the appliance
from the mains supply.
Never immerse the appliance in water.
Do not use a steam cleaner.
● All loose parts must be washed by hand.
● Wipe the housing and window, using only
a soft, damp cloth.
● Do not use abrasive cleaning materials.
● Rinse out the water tank
5
with water
only.
● Remove the drip tray
11
with its cover
grille.
● Remove the large drip tray
12
, together
with the cover grille and the capsule
container
13
, by pulling forwards (Fig.
6
).
● Wash all parts with a mild detergent
solution.
● When relocating, ensure that all parts are
properly seated.
● First pull the coffee dispenser
14
forwards
out of its location, followed by the capsule
holder
15
(Fig.
8
).
● Clean with a detergent solution and a soft
brush (not dishwasher-safe).
● Slide the capsule holder
15
back into
position, followed by the coffee dispenser
14
.
Nozzle 10 for hot water/steam
● Unscrew the nozzle
10
from the steam
pipe.
● Dismantle all parts (Fig.
7
).
● Clean with a detergent solution and a
soft-bristled brush. Clean the front tip of
the nozzle
10/c
using a blunt needle.
● Rinse all parts with clean water, and dry
off.
Frothing attachment 9
The individual parts of the frothing
attachment
9
must always be kept clean.
Even the smallest milk residue will impair
the frothing results.
Accordingly, the frothing attachment
9
must
be rinsed through with water immediately
after use:
● Dip the tube in a vessel containing cold
water.
● Place a second vessel under the nozzle
of the frothing attachment
9
.
● Set the selector of the frothing attachment
9
to
C
(hot milk).
● Press the steam button
h
.
● When the display alternates between
Steam
and
ready
, press the steam
button h once again.
● Rinse the frothing attachment
9
through
for around ten seconds.
● To terminate the process, press the
steam button
h
.
Depending on usage, the frothing
attachment
9
should be disassembled and
cleaned daily, or at least once a week.
● Pull the frothing attachment
9
off the
steam pipe
7
from below (Fig.
5
).
● Disassemble the frothing attachment
9
(Fig.
4
).
● Clean the individual parts carefully with a
detergent solution and a soft brush. Rinse
all parts clean, and dry off. Do not place
them in a dishwasher.
en
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TK 911 N2 FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TK 911 N2 FR in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info