i Repeat the process if a second cup is
desired.
Note: If coffee is not brewed within 90
seconds, the brewing chamber is emptied
automaticallyinordertopreventoverlling.
The appliance is rinsed.
When using pre-ground coffee, it is not
possible to select the “espresso doppio”
setting.
Preparing hot water
The appliance must be ready for use. This
function allows water to be heated for a cup
of tea, for example.
! Risk of burns
The nozzle gets very hot. Do not touch the
metal parts!
●Placeanappropriatecupunderthe
nozzle 9.
●Pushthesleeveonthenozzle9 all the
way down.
●Turnthedial8 to g/h.
! Risk of scalding
When the dial 8 is set to g/h, the nozzle
may sputter a little. Do not touch the nozzle
9 or aim it at anyone.
●Endtheprocessbyturningthedial8
back to ““O”..
Important:
It is not possible to dispense hot water
when the appliance is in “eco” mode. First
press the eco button and then dispense hot
water.
Steam for foaming milk
The appliance must be ready for use. You
canfoamthemilkrstandaddthecoffee
on top, or foam the milk separately and
pour it into the coffee.
! Risk of burns
The nozzle gets very hot. Do not touch the
metal parts!
●Pushthesleeveonthenozzle9 all the
way down.
●Fillthecupapproximately1/3fullofmilk.
●Pressthehbutton.Itwillstarttoash.
i The appliance will heat up for approx. 20
seconds.
●Immersethenozzle9 deep into the milk,
but do not let it touch the bottom of the
cup.
●Whentheh button lights up and 8
appears on the display, turn the dial 8 to
g/h.
! Risk of scaldingRisk of scalding
When the dial is set to g/h, the nozzle
9 may sputter. Escaping steam is very hot
and may cause liquids to sputter. Do not
touch the nozzle 9 or aim it at anyone.
●Rotatethecupslowlyuntilthemilkisfully
foamed.
●Endtheprocessbyturningthedial8
back to ““O”..
Note: When the nozzle 9 has cooled
down, clean it immediately. Dried residue is
difculttoremove.
Tip: If possible, use cold low-fat (1.5% fat)
milk.
Steam for heating drinks
! Risk of burns
The nozzle gets very hot. Do not touch the
metal parts!
The appliance must be ready for use.
●Pushthesleeveonthenozzle9 all the
way up.
●Pressthehbutton.Itwillstarttoash.
i The appliance will now heat up for
approx. 20 seconds.
●Immersethenozzle9 deep into the liquid
you want to heat.
●Whentheh button lights up and 8
appears on the display, turn dial 8 to g/
h.