6 eco button
The appliance can be put into “eco” mode
or returned to normal mode with the eco
button.
In “eco” mode the appliance consumes less
energy.
All displays and buttons are dimmed,
only messages such as “Empty trays” are
displayed in the usual brightness.
The temperature of the cup shelf (warming
function) is lower.
Switching to “eco” mode starts an automatic
rinse cycle.
The appliance does not rinse if:
– no coffee was dispensed before it was
switched to “eco” mode.
– steam was dispensed shortly before it
was switched off.
Note: The appliance is programmed so
that it switches to “eco” mode automatically
after about 10 minutes. The default time can
be changed (see “Settings and displays”).
7 Steam generation button h
Button h generates steam for foaming or
warming.
8 Steam dispensing dial
Hot water or steam can be dispensed by
turning the dial to hot water g or steam h.
To dispense steam, the steam generation
button hmustbepressedrst(see“Steam
for foaming milk”).
9 on Fill water tank 12, hold cup
+ 8ashing undernozzle9 and turn
dial 8 to g/h
8 ashing Turndial8 to g/h
8 on Turn dial 8 to “O”
D on Empty trays
Dashing Traysmissing
4 Coffee dispensing button 4
Coffee can be brewed by pressing this
button.
Press once for one cup. The coffee is
ground, brewed and dispensed into the cup.
Button 4ashesduringthisprocess.
Press twice within 3 seconds for two
cups. The coffee is ground, brewed and
dispensed into the cups (the grinding and
brewing process takes place twice). Button
4ashesand6 (2 cups) appears on the
display during this process.
Important:
When the “espresso doppio” setting is se-
lected, button 4 can only be pressed once.
The espresso is ground, brewed and then
dispensed into the cup. The grinding and
brewing process is performed twice.
i If the coffee dispensing button 4 is
pressed again, the coffee brewing
process is terminated.
5 Coffee strength button 5
This button 5 is used to select the coffee
strength:
5 mild
55 medium
555 strong
The selected setting is shown on the
display.
