! Risk of scaldingRisk of scalding
When the dial 8 is set to g/h, the nozzle
9 may sputter a little. Escaping steam is
very hot and may cause liquid to sputter.
Do not touch the nozzle 9 or aim it at
anyone.
●Endtheprocessbyturningthedial8
back to ““O”..
Note: When the nozzle 9 has cooled down,
cleanimmediately.Driedresidueisdifcult
to remove.
Maintenance and daily
cleaning
! Risk of electric shock
Unplug the appliance before cleaning it.
Never immerse the appliance in water. Do
not use a steam cleaner.
●Wipetheoutsideoftheappliancewitha
damp cloth. Do not use scouring agents.
●Alwaysremoveanylimescale,
coffee,milkordescalinguidresidue
immediately. Such residue can cause
corrosion.
●Washallremovablepartsbyhandonly.
●Rinseoutthewatertank12 with water
only.
●Remove,emptyandcleanthetraysfor
coffee grounds 20 and residual water 21.
●Wipeouttheinsideoftheappliance(tray
holders).
N.B.: If the appliance is cold when switched
on, or if it is switched to “eco” mode after
dispensingcoffee,itrinsesautomatically;in
other words the system cleans itself.
Nozzle 9 for hot water/steam
●Unscrewthenozzle9 from the steam
pipe.
●Dismantleallparts(Fig. E).
●Cleanwithacausticcleaningsolutionand
a soft brush. Clean the tip of the nozzle
9c with a blunt needle.
●Thoroughlyrinseanddryallparts.
Brewing unit
The brewing unit can be removed for
cleaning (Fig. D).
●Presstheeco button to start the
automatic rinse cycle.
●Turnthepoweron/offswitch1 to 0.
●Openthedoor17 to the brewing unit 18.
●Holdtheredbutton18a down and push
the handle 18b up until you hear it
engage.
●Graspthebrewingunit18 by the handle,
remove carefully, and rinse under running
water. Do not use cleaning agents. Do not
place in the dishwasher.
●Vacuumtheinsideoftheappliance,or
clean it with a damp cloth.
●Reinsertthebrewingunit18 all the way
into the appliance.
●Holdtheredbutton18a down and push
the handle 18b down as far as it goes,
until you hear it engage. The brewing unit
is now secure.
●Closethedoorsofthebrewingunit.
Service programme:
Combined cleaning and
descaling process
If an “S” is shown on the display while the
appliance is on, the service programme
must be run immediately to clean and
descale the appliance. If the service
programme is not run as instructed, the
appliance may be damaged.
Specially-developed descaling (order no.
310451) and cleaning agents (order no.
310575) are included with the appliance
and can also be obtained from customer
service.