Manual Siemens tk 56001 56004 (page 17 of 106) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

362542

Zoom out

Zoom in

1/106

Settings and displays

Setting the water hardness

It is important that the water hardness be

set correctly, so that the appliance indicates

accurately when the descaling programme

should be run. The factory setting is a water

hardness of 4. You can check the water

hardness using the enclosed test strip or by

asking your local water supplier.

Degree Water hardness

German (°dH) French (°fH)

1-7

8-15

16-23

24-30

1-13

14-27

28-42

43-54

●Determinethewaterhardnesswiththe

enclosed test strip.

e.g. Hardness = 2

●Switchtheapplianceto“eco” mode.

●Holddownthesteambuttonh for at

least 5 seconds. The number of service

buttons 4, 5, eco, h that light up

indicate the selected water hardness.

●Pressthesteambuttonh repeatedly

until the correct number of buttons is lit.

●Pressbuttoneco once. The selected

number of service buttons should light

upbriey;thisindicatesthatthedesired

water hardness setting has been saved

successfully.

Ifawaterlter(specialaccessory)isused,

the water hardness should be set to 1.

Note: If no button is pressed within 90

seconds, the appliance switches to stand-

by mode without saving the new settings.

In this case, the previous water hardness

setting is retained.

Thersttimealterisusedorafter

changingthelter,theapplianceneedsto

be cleaned.

●Fillthewatertankuptothe“0.5l”mark.

●Placeasuitablecontainer(approx.0.5

litres) under the nozzle 9.

●Turnthedial8 to g/h.

●Ifnowatercomesoutofnozzle9, turn

the dial back to ““O”..

●Fillthewatertankandwaterpipes(see

section “Switching on the appliance”).

Setting the time for switchover to “eco”

mode

The appliance can be programmed so that

it automatically switches to “eco” mode

after a certain time (from 10 minutes to 4

hours).

●Switchtheapplianceto“eco” mode.

●Holddownthe5 button for at least 5

seconds.

If 4 lights up,

= switchover after 10 minutes

If 4, 5 lights up,

= switchover after 30 minutes

If 4, 5, eco lights up,

= switchover after 2 hours

If 4, 5, eco, h lights up,

= switchover after 4 hours

●Pressthe5 button to set the required

time.

●Presstheeco button to save the setting.

Note: The factory setting is 10 minutes.

Adjusting the grinding unit

Sliding switch 16 adjusts the degree of

grinding,fromcoarsetone.

Warning

Adjust the grinding unit only while it is

running! Otherwise the appliance may be

damaged.

●Pressthecoffeedispensingbutton4.

●Whilethegrindingunitisrunning,move

the sliding switch 16 to the desired

position:thesmallerthedots,thenerthe

grind.

i The new setting will not become apparent

until the second or third cup is brewed.

Tip: For dark roast coffee beans, choose a

coarsergrind;forlightroastbeans,selecta

nergrind.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens tk 56001 56004 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens tk 56001 56004 Manual

Product: