473258
25
Zoom out
Zoom in
Previous page
1/131
Next page
Warning!
The Ironer must be fully lowered for
transportation!
Put the shirt ironer in position.
Turn lifting knob 1, Fig. 1, anti-clockwise
while gripping the button band, 7, Fig. 2,
with the other hand and pull it upwards.
Warning!
On releasing the lifting knob and pulling
the button band upwards, the appliance
rises to a specific height. Do not place
anything on top of the appliance during
this process!
Grip the button band adjuster with both
hands and finish lifting the top 7, Fig. 2 part
of the appliance until you hear a click, which
indicates that it has reached its limit. Fig. 4.
Plug it in.
For safety reasons, ironing and/or airing
can only be started when the upper frame
is completely raised.
Ironing
Turn the collar adjuster knob 6, Fig. 2 to its
vertical position.
Open all the flaps on the button band
adjuster and the collar support.
Fitting the shirt
Unbutton the shirt and the cuffs.
Lift the collar.
Fit the damp, spin-dried shirt onto the
ironing dummy.
Fit one arm of the ironing dummy inside the
shirtsleeve. Do not twist the sleeves, Fig. 5.
Place the other arm of the ironing dummy
into the other shirtsleeve. Do not twist the
sleeves.
The arrows shown in the picture indicate
the lower seam. Fig. 6.
Line the lower hem up with the line marked
on the plastic part at the top of the button
band adjuster, Fig. 7
Hold the collar flaps firmly and close the two
top flaps on the button band adjuster.
Warning!
Foreign objects (e.g. pens, clips) may
damage the garment and/or the ironing
dummy. Empty all pockets on the garment.
Programme Airing time in min
cold 5
hot 1st level 5 + 1
hot 2nd level 10 + 1
25
Use
Ironing / Airing
The Ironing/Airing programme airs the
garment with cold or warm air.
The ironing/airing programme is ideal for suit
jackets, sports jackets, sports coats and all
types of jacket made from textile.
There are two different airing programmes.
Use “ cold” (cold airing) to air garments that
have not been worn very much.
Use “ hot” (hot airing)
To dry damp jackets
To iron jackets, as long as the manufacturer
endorses damp garments. Jackets need to
be slightly damp in order to be ironed.
To complete the drying of thick fabrics that
were not entirely dried out during ironing.
The table below shows approximate airing
times.
All fabrics are ironed at the same
temperature. There is no risk of
overheating. The only factor that varies
according to the fabric being ironed is the
ironing time.
The ironing time depends on the quality of
the fabric being ironed, its weight, the
dampness remaining after being washed
and dried and the size of the shirt/blouse.
In the case of an average-quality, cotton
shirt, the ironing/drying process takes about
9 min, of which one minute is set aside for
airing with cold air.
The shirt is totally ironed when it is dry.
Be sure to note the type of fabric being
ironed.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TJ10100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TJ10100 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info