710200
28
Zoom out
Zoom in
Previous page
1/224
Next page
en Service programmes
28
. Service programmes
Se r v i c e pr ogr ammes
Every so often – the exact frequency
depends on usage and water hardness
– one of the following messages will
appear in the display in place of the
coffee selection:
Rinse milk system
Run descaling program urgently!
Run cleaning program urgently!
Run calc'nClean program urgently!
The appliance should immediately be
cleaned or descaled using the
appropriate programme. Alternatively,
the two processes Descale and Clean
can be carried out together using the
calc’nClean function. Failure to carry out
the service programme according to the
instructions may damage the appliance.
You can also start the service
programmes at any time without having
to wait for a reminder to appear in the
display. Press the $/± button, select the
desired programme and run it.
Notes
Important: If descaling is not
performed on the appliance in good
time, the following appears
"Descaling programme overdue.
Device will shortly be locked!".
Immediately perform the descaling
process in accordance with the
instructions. If the appliance is
locked, it can only be operated
again once descaling has been
carried out.
Caution! For each of the service
programmes, use descaling and
cleaning agents as described in the
instructions and observe the
(relevant) safety information.
Do not drink the liquids.
Never use citric acid, vinegar or any
vinegar-based agents to descale the
appliance.
For cleaning and descaling, only use
the tablets intended for such
purpose.They have been specially
developed for this appliance, and
new stocks can be ordered through
customer service. ~ "Accessories"
on page 12
Never insert descaling tablets or
other products into the grounds
compartment.
Never interrupt the service
programme.
Prior to starting a service
programme, remove, clean and
re-insert the brewing unit. Rinse the
milk system.
At the end of a service programme,
wipe down the appliance using a
soft, damp cloth to immediately
remove any descaler residue. This
residue may cause corrosion.
New sponge cloths may contain
salts. Salts can cause rust film on
stainless steel, so cloths must
always be washed out thoroughly
before use.
Using a water filter increases the
intervals until a service programme
needs to be performed.
If one of the service programmes is
interrupted, e.g. by a power failure,
proceed as follows:
The appliance automatically starts a
special rinsing process.
1. Rinse out the water tank.
2. Pour in fresh, still water up to the
"max" marking and confirm.
The programme starts and rinses the
appliance.Duration: approx.
2 minutes.
3. Empty, clean and re-insert the drip
tray.
4. Empty, clean and re-insert the milk
container.
The programme has finished. The
appliance is ready for use again.
5. Press $/± button to close the
programme.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TI924 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TI924 in the language / languages: German as an attachment in your email.

The manual is 9,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens TI924

Siemens TI924 User Manual - English - 224 pages

Siemens TI924 User Manual - Dutch - 188 pages

Siemens TI924 User Manual - French - 224 pages

Siemens TI924 User Manual - Polish - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info