en Operating the appliance
18
doubleShot function
The longer coffee is brewed, the more
bitter substances and undesirable
aromas are released. This has a
negative effect on the taste and makes
the coffee less easily digestible. The
appliance therefore has a special
doubleShot function for extra strong
coffee.When half the volume has been
prepared, a second portion of coffee
beans is ground and brewed, so that in
each case only the pleasant and
beneficial flavours and aromas are
released.
Note: The doubleShot function can be
selected for all coffee drinks except for:
■ drinks with a small volume of coffee,
e.g. Ristretto
■ coffee drinks with milk and a small
volume of coffee
■ a small volume of coffee, e.g. setting
200 ml "Caffe Latte" with a 90%
share of milk (10% share of coffee)
■ preparation with ground coffee
■ dispensing two cups
Adjusting the milk/coffee mixing ratio
A coffee drink with milk is selected.
1. Press the milk button.
2. Use the rotary selector to set the
share of milk in %.
Example: When a value of 30% is
configured, 30% milk and 70%
coffee will be dispensed.
3. Press the milk button or the rotary
selector to confirm.
Selecting cup size
A drink is selected.
1. Press the ml button. The preset
volume depends on the type of
beverage.
2. Use the rotary selector to adjust the
desired volume in ml increments.
3. Press the ml button or the rotary
selector to confirm.
Notes
■ The volume cannot be changed for
ristretto.
■ The volume dispensed can fluctuate
depending on the quality of the milk.
Preparing two cups at once
A coffee drink or a coffee drink with milk
is selected.
1. Press the # button.
2. Place two pre-heated cups on the
left and right below the outlet
system.
3. To begin dispensing the drink, press
the rotary selector.
The selected drink will be brewed and
will then be dispensed into the two
cups.
Notes
■ The drink is prepared in two steps
(two grinding operations). Please
wait until the process is fully
completed.
■ The aromaDoubleShot function is
not possible in the # selection.
