710199
17
Zoom out
Zoom in
Previous page
1/224
Next page
Operating the appliance en
17
Notes
While milk is being prepared, you
may hear a whistling sound. These
noises are emitted for technical
reasons and are normal.
Dried milk residues are difficult to
remove so always perform cleaning.
~ "Cleaning the milk system"
on page 26
The quality of the milk froth depends
on the type of milk or the
plant-based alternative used.
:Warning
Risk of burns!
The milk system becomes very hot.
After use, always let it cool down before
you touch it.
Using the milk container
The milk container H has been
designed especially for use together
with this appliance. It is intended solely
for use in the household and for storing
milk in the refrigerator.
Important: The milk container can only
be connected if the milk system is
installed in the outlet system with an
adapter and hose. (~ Fig. #)
1. To remove the lid, press the marking
and remove the lid. (~ Fig. ')
2. Pour in the milk.
3. Press the lid onto the milk container
until it engages.
4. Connect the milk container on the
left of the appliance. The milk
container must engage.
Coffee drinks with milk
The appliance is switched on. The water
tank and bean container have been
filled.
The milk container filled with milk is
connected.
1. Place a cup or a glass under the
outlet system.
2. Use the rotary selector to select the
desired drink.
The name of the drink and the currently
active values are shown on the display.
3. To change the settings for the
selected drink.
~ "Adjusting beverage settings"
on page 18 ~ "Settings"
on page 21
4. To begin dispensing the drink, press
the rotary selector.
The milk is dispensed into the cup or
glass first. The coffee is then brewed
and dispensed into the cup or the glass.
Note: Pressing the rotary selector once
can prematurely stop the dispensing of
milk or coffee; pressing the rotary
selector twice stops the drink
dispensing completely.
Milk froth or warm milk
The appliance is switched on. The water
tank has been filled.
The milk container filled with milk is
connected.
1. Place a cup or a glass under the
outlet system.
2. Select "Milk froth" or "Warm milk"
with the rotary selector.
The name of the drink and the currently
active values are shown on the display.
3. To change the settings for the
selected drink.
~ "Adjusting beverage settings"
on page 18 ~ "Settings"
on page 21
4. To begin dispensing the drink, press
the rotary selector.
Milk froth or warm milk is dispensed
into the cup or glass.
Note: To prematurely stop dispensing
the drink, press the rotary selector
again.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TI923 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TI923 in the language / languages: English, French as an attachment in your email.

The manual is 8.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens TI923

Siemens TI923 User Manual - German - 224 pages

Siemens TI923 User Manual - Dutch, Polish - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info