Manual Siemens TI351209RW (page 16 of 176) (English, German, Dutch, French, Polish)

709317

Zoom out

Zoom in

1/176

en Operating the appliance

Water filter

Wat er fil ter

~ Fig. '

A water filter lessens limescale deposits

and reduces impurities in the water. The

appliance also does not need to be

descaled so often. Water filters are

available from retailers or from

customer service.

If a water filter is inserted, the appliance

will show when this needs to be

changed. The ) symbol is flashing.

Inserting or replacing a water filter

A new water filter must be rinsed before

it can be used.

The appliance is switched on. The water

tank has been filled.

1. Simultaneously hold down %

and calc’nClean for at least

3 seconds.

2. Touch espresso button, and "W.

hardness" will be activated.

3. Touch % button and make the

following selection:

4. Immerse the water filter (opening

facing up) in a container filled with

water until no more air bubbles rise

to the surface.

~ Fig. '

5. Then press the water filter firmly into

the empty water tank.

6. Fill the water tank with water up to

the "max" marking.

7. Place a container with a capacity of

1.0litre under the outlet.

8. Touch espresso button to save the

setting and activate rinsing.

9. Insert water tank.

10. Touch espresso button to save the

setting and start rinsing. Water will

now flow through the filter.

11. Touch calc’nClean button to exit the

menu.

12. Then empty the container. The

appliance is ready for use again.

Removing the water filter

If the water filter has been removed and

no new one inserted, please select the

appropriate water hardness. ~ "Setting

the water hardness" on page 17

Frost protection

To prevent frost damage during

transportation and storage, the

appliance must be completely emptied

beforehand.

Info: The appliance must be ready for

use and the water tank filled.

1. Place a large container under the

outlet of the milk frother and push

the frother down.

2. Press and hold milk button for at

least 5 seconds.

The LED in the button flashes, and

the appliance now heats up.

3. As soon as steam escapes from the

milk frother, remove the water tank.

4. Allow the appliance to cool down.

Wait until ' symbol and all LEDs are

flashing.

5. Use k button to switch the

appliance off.

6. Empty the water tank and the drip

tray and thoroughly clean the

appliance.

The appliance can now be transported

or stored.

Note: The brewing unit is now secured

and cannot be removed.

with water filter

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TI351209RW in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 7,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens TI351209RW Manual

Product: