561409
27
Zoom out
Zoom in
Previous page
1/172
Next page
23
en
Empty drip tray
Replace drip tray
Empty the drip tray 23 and reinsert it.
The appliance is ready for use again.
calc‘nClean
Duration: approx. 36 minutes.
calc‘nClean combines the separate functions
of descaling and cleaning.
If both programmes are due to be run soon,
the espresso machine automatically
suggests this service programme.
Cleaning and service
Short rinse
milk system
calcnClean
start
The
start button 8 ashes while the different
calc‘nClean processes are running. The
gures on the top right indicate the progress
of the programme.
Important: If there is a water lter in the
water tank 11, it needs to be removed
before the service programme is run.
Press the à button 3.
calcnClean
start
Press the start button 8; the display 5 will
guide you through the programme.
Empty drip tray
Replace drip tray
Empty the drip tray 23 and reinsert it.
Swivel the coffee outlet 9 to the right until
it clicks into place.
Place 1 l container
Place suction pipe in container
start
Place a container with a capacity of at
least 1 l under the milk frother 10.
Place the end of the suction pipe 10d in
the container.
Press the start button 8. The appliance
rinses twice.
Cleaning
Open powder compartment
Open the powder compartment 18.
Insert Siemens cleaning tablet
and close drawer
Drop a Siemens cleaning tablet in the
drawer 18 and close.
Remove filter
start
Info: If the water lter is activated, the dis-
play will prompt you to remove the lter,
then press the start button 8 again.
Add 0.5 l water and descaler
start
Pour lukewarm water into the empty water
tank 11 up to the “0.5 l” mark and then
dissolve two Siemens descaling tablets
in it.
Press the start button 8. The descaling
programme now runs for about
20 minutes.
Descaling
Not enough descaling fluid.
Refill fluid
start
Info: If there is not enough descaling solu-
tion in the water tank 11, the corresponding
prompt is displayed. Pour in descaling solu-
tion and press the start button 8 again.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TE712501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TE712501 in the language / languages: English, Dutch, French, Polish as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens TE712501

Siemens TE712501 User Manual - German, Italian - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info