790173
46
Zoom out
Zoom in
Previous page
1/112
Next page
46
en Care and daily cleaning
F Rinsing the filter simultaneously
activates the setting for displaying the
message “Please change water filter”.
When this message appears, or at
the latest after two months, the lter
will no longer be e󰀨ective. It needs to
be replaced for reasons of hygiene
and to prevent a build-up of limescale
(which could damage the appliance).
If you do not intend to insert a new filter,
select the setting No filter and touch B
to confirm.
F If the appliance has not been used
for a prolonged period (for example,
while you are on holiday), the existing
filter should be rinsed before the
appliance is used again. To do this,
simply dispense a cup of hot water.
Languages
Setting up the language to be used for
display texts.
Use I to choose the desired
language and touch B to confirm
your choice.
Frost protection
Service programme to prevent frost
damage during transportation and storage.
This programme completely empties the
appliance.
F The appliance must be ready for use
and the water tank 5 must be filled.
Touch C to begin running the
programme.
Remove the water tank; the appliance
automatically empties all its pipes and
then switches itself off.
Empty the water tank 5 and the drip tray 17.
Key tones
Switches on or off the tones that you hear
when you touch the control panel.
Touch B to confirm your choice.
Use I to choose Key tones ON
or Key tones OFF and touch B to
confirm your choice.
Beverage statistics
(depending on the type of appliance)
Shows the volume of drinks dispensed
since the appliance was taken into service.
Touch F to exit from the display.
Factory settings
Resets your own settings to the condition
when delivered.
Touch C to clear all your own
settings.
Care and daily cleaning
ERisk of electric shock!
Before cleaning the appliance, unplug
it from the mains. Never immerse
the appliance in water. Do not use a
steam cleaner.
Wipe the outside of the appliance with a
soft, damp cloth.
Clean the control panel with a microfibre
cloth.
Do not use any cleaning agents
containing alcohol or spirits.
Do not use abrasive cloths or cleaning
agents.
Always immediately remove any lime-
scale, or residues of coffee, milk, cleaning
or descaling solution. It is possible for
corrosion to form underneath such
deposits.
New sponge cloths may contain salts that
can cause rust films to form on stainless
steel, so such cloths should always be
thoroughly rinsed before use.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens TE657509DE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TE657509DE in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens TE657509DE

Siemens TE657509DE User Manual - Dutch - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info