Manual Siemens TE607203 (page 12 of 164) (English, Dutch, French, Polish)

561475

Zoom out

Zoom in

1/164

Initial use

General

Fill the appropriate container using only

pure, cold, uncarbonated water and solely

roasted beans (preferably espresso or

coffee bean blends for fully automatic coffee

machines)� Do not use coffee beans that

have been glazed, caramelised or treated

with other additives containing sugar, since

they will block the brewing unit�

The water hardness setting on the

appliance can be adjusted� The factory

setting for the water hardness is 4� Use

the enclosed test strip to determine the

hardness of your water supply� If this

shows a value other than 4, you will need

to programme the appliance appropriately

after it has been taken into service (see

section “Menu – Water hardness”)�

Setting up the appliance

● Remove any protective plastic lm.

● Place the fully automatic coffee machine

on a level, waterproof surface that is able

to support its weight�

● The appliance’s ventilation slits must not

be covered or obscured�

Important: Only use the appliance

in a frost-free room� If it has been

transported or stored at tempera-

tures below 0°C, wait at least 3 hours

before taking it into operation�

● Pull the mains plug out of the cable storage

compartment 18 and connect it to the

power supply� You can adjust the length of

the cable by pulling it further out or pushing

it back in� To do this, place the appliance

with its back ush with the edge of the

work surface and either pull the cable out

downwards or push it in upwards�

● Flip up the lid of the water tank 6�

● Remove the water tank 5, rinse it out and

ll it with fresh cold water. Do not ll it

past the “max” mark�

● Replace the water tank 5, making sure

that it is straight, and push it right down

into place�

● Reclose the lid of the water tank 6�

● Fill the bean container 9 with coffee beans�

● Use the main switch J 1 to switch on the

appliance�

The control panel and the display will

be activated� The display will show the

previously specied language, which will

also be used for all subsequent display

texts� A number of different languages are

available�

● Touch I repeatedly until the display

indicates the desired language�

Deutsch

English

Français

● Touch C to conrm your

selection�

The chosen language is now stored�

The brand logo will light up on the display 3�

The appliance will heat up and rinse itself,

a small amount of water will run out of the

drink outlet 4�

The appliance is ready for use when the

symbols and the display on the control

panel are lit�

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens TE607203 in the language / languages: English, Dutch, French, Polish as an attachment in your email.

The manual is 6,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens TE607203 Manual

Product: