529627
28
Zoom out
Zoom in
Previous page
1/40
Next page
en Fault, what to do?
28
A different error code is
indicated on the digital
display.
(:‹‚ to :„‹)
A technical fault has probably
occurred.
Switch off appliances with the ON/OFF
switch (. After a short time restart
the appliance.
If the problem recurs, turn off the tap and
pull out the mains plug.
Call customer service and mention the error
code.
Display flashes Door not closed properly. Close the door. Ensure that no objects
(utensil, fragrance dispenser) are protruding
over the basket and preventing the door
from closing.
Refill indicator for salt @
and/or rinse-aid H is lit.
No rinse aid. Refill rinse aid.
No salt. Refill with special salt.
Sensor does not detect salt
tablets.
Use different special salt.
Refill indicator for salt @
and/or rinse-aid H
is not lit.
Refill indicator switched off. Activation/deactivation (see chapter Water
softening system/Special salt or Rinse aid).
There is still enough special salt/
rinse aid available.
Check refill indicator, levels.
Water is left
in the appliance at the end
of the programme.
Filter system or area under
the filters 1Z is blocked.
Clean filters and area underneath (see
Waste water pump).
The programme has not yet
ended.
Wait until programme ends or reset (see
Terminating the programme).
Fault Cause Remedial action
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens SN66M083EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens SN66M083EU in the language / languages: English as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens SN66M083EU

Siemens SN66M083EU Quick start guide - English - 2 pages

Siemens SN66M083EU Quick start guide - German - 2 pages

Siemens SN66M083EU User Manual - German - 42 pages

Siemens SN66M083EU Quick start guide - Dutch - 2 pages

Siemens SN66M083EU User Manual - Dutch - 44 pages

Siemens SN66M083EU Quick start guide - French - 2 pages

Siemens SN66M083EU User Manual - French - 46 pages

Siemens SN66M083EU Quick start guide - Polish - 2 pages

Siemens SN66M083EU User Manual - Polish - 46 pages

Siemens SN66M083EU Quick start guide - Portuguese - 2 pages

Siemens SN66M083EU User Manual - Portuguese - 44 pages

Siemens SN66M083EU Quick start guide - Spanish - 2 pages

Siemens SN66M083EU User Manual - Spanish - 48 pages

Siemens SN66M083EU User Manual - Spanish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info