652290
46
Zoom out
Zoom in
Previous page
1/52
Next page
en Fault, what to do?
46
Appliance cannot be
switched on or operated.
Malfunction. Disconnect appliance from the power
supply; pull out the mains plug or switch
off the fuse. Wait at least 5 seconds, then
connect the appliance to the power
supply.
Appliance does not start. The mains fuse has tripped. Check mains fuse.
Power cord not inserted. Ensure that the power cord is plugged all
the way into the back of the appliance and
into the socket. Check that the socket
functions.
The appliance door has not been
shut properly.
Close the door.
Programme starts
automatically.
You did not wait until programme
ended.
Perform reset.
Door does not open
automatically at the end of
the Eco 50° programme.
Eco drying deactivated. Activate Eco drying.
The child-proof lock is activated. Deactivate the child-proof lock.
Eco 50° programme not
selected.
Select Eco 50° programme.
Additional functions selected. Deselect additional functions.
ExtraDry is switched on. Switch off ExtraDry.
Door is not set correctly. Set the door correctly with the aid of the
installation instructions so that the door
gap is min. 70 mm - 100 mm.
Wrong screws used to adjust the
door gap. If excessively long
screws are screwed in, they may
deactivate Eco drying.
To adjust the door gap, use screws which
have a max. size of ø 4X30 (included in
the product package, see installation
instructions).
Door and door seal dirty. Clean door and door seal with a damp
cloth and a little washing-up liquid.
Safety device switches the Eco
drying function off. A technical
fault has probably occurred.
Call the after-sales service.
The door is difficult to
open.
Child-proof lock is activated. Deactivate the child-proof lock.
Door cannot be closed. Door lock has been activated. Close door with increased force.
Door cannot be closed due to
installation.
Check appliance installation: Door
or attached parts must close without
obstruction.
Fault Cause Remedial action
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens SN578S00TG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens SN578S00TG in the language / languages: English as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info