520342
47
Zoom out
Zoom in
Previous page
1/61
Next page
en
47
Timer programming
You can delay the start of the programme
by up to 24 hours in ½ hour steps.
If the Timer programming option is
selected, “Delay start 0:00 hrs” is
displayed.
Select the desired time.
Return to the main menu and start the
selected programme.
Close the door. The time begins to
count down.
To interrupt or check the countdown,
open the door.
When the set time has elapsed, the
programme starts automatically.
Until the programme starts you can
change the set time and selected
programme. Return to the main menu
by pressing the “Back” button and
change the settings. Finally, restart
the programme.
To delete Timer programming, reset
the time to 0:00.
Reduce time
You can reduce the running time of
automatic programmes. An optimum
cleaning result is still obtained as both
the water and energy consumption is
increased.
If the Reduce time option is selected,
“Reduce time: Off” (factory setting) is
displayed.
Select “Reduce time: On”.
Return to the main menu and start the
selected programme.
If you do not want to use Reduce time
the next time you use the dishwasher,
you must switch off the option again.
Degree of drying
If the “Degree of drying” option is
selected, “Normal drying” is displayed
(factory setting).
Alternatively, you can select “No drying”
or “Extra drying”.
The temperature of the final rinse is
increased in all programmes for “Extra
drying”. (Note the higher temperature
may not be suitable for fragile utensils.)
Buzzer volume
You can vary the volume of the buzzer or
switch it off completely.
If the Buzzer volume option is selected,
“Buzzer 4” is displayed (factory setting).
You can select value 0 (buzzer
switched off) or values from 1 (quiet)
to 6 (loud). Buzzer is emitted briefly,
indicating the volume which
corresponds to the value just selected.
Water hardness
Before using the appliance for the first
time or if the water hardness changes,
the dishwasher softening system must be
adjusted to the degree of hardness of your
tap water. Proceed as described in the
chapter “Adjusting the softening system”.
Rinse aid dosage
You can adjust the rinse aid dosage.
If the Rinse aid dosage option is
selected, “Rinse aid 4” is displayed
(factory setting).
Do not change this setting unless there
are streaks (reduced value) or water
stains (increased value) on the utensils.
You can select a value between 0
and 6.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens SE20A290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens SE20A290 in the language / languages: English, German as an attachment in your email.

The manual is 4,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens SE20A290

Siemens SE20A290 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info