Manual Siemens se 24a660 (page 44 of 92) (English, German, Dutch, French)

124140

Zoom out

Zoom in

1/92

Installation

In order to function correctly the

dishwasher must be properly installed.

Specifications for the water intake and

waste-water drainage, as well as electrical

connections, must fulfil the criteria that are

set out in the following paragraphs and the

installation instructions.

When installing the dishwasher, carry out

tasks in the following order:

– check contents of delivery upon receipt,

– site dishwasher,

– connect drainage hose,

– connect inlet hose to water supply,

– connect dishwasher to electricity supply.

Checking contents of delivery

All functions of your dishwasher have

been thoroughly tested in the factory. A

small number of water marks have been

left on the dishwasher as a result. They

disappear as soon as the appliance is

used for the first time.

Siting the dishwasher

Dimensions associated with siting the

dishwasher are contained in the

installation instructions. Ensure that the

appliance is completely level by adjusting

the feet. Make sure that it is standing on a

firm surface.

Drainage connection

See the installation instructions for details

of procedure to be followed.

If necessary, fit a siphon trap (U-bend) with

a connecting piece for the drainage hose.

Connect the drainage hose to the trap

using the enclosed parts.

Fresh-water connection

Connect the inlet hose to a water tap using

the enclosed parts and in accordance with

the installation instructions.

Water pressure:

Minimum 0,5 bar – maximum 10 bar.

If the water pressure is higher, install a

pressure reducing valve.

Flow rate:

Minimum of 10 litres per minute.

Water temperature:

We recommend that you use cold water.

If you do use hot water, the temperature

should not exceed 60 °C.

Electrical connection

This appliance should only be connected

to a 230/240 V AC source via a properly

installed earthed socket. See nameplate

31 for size of required fuse.

The socket must be installed close to the

dishwasher.

If you need to extend the mains

connecting lead, do not cut off the plug.

Replace the whole cable, which can be

disconnected at the junction box on the

rear of the appliance.

If the domestic wiring includes a residual-

current-operated (FI) circuit-breaker, make

sure that it bears the mark, as only

this type conforms to the latest regulations

Disconnecting the dishwasher

Here too, it is important that tasks are

carried out in the correct sequence:

always unplug the appliance from the

mains electricity first of all.

Pull plug out of wall socket.

Turn off water supply.

Disconnect drain and water input hoses.

Remove screws in underside of work

surface. Detach base board, if fitted.

Pull out appliance and carefully withdraw

hoses at same time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens se 24a660 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens se 24a660 Manual

Product: