Manual Siemens se 24a660 (page 36 of 92) (English, German, Dutch, French)

124140

Zoom out

Zoom in

1/92

Washing dishes

Programme selection

The most appropriate programme can be

identified by comparing the type of

crockery, cutlery, etc., as well as the

amount and condition of food remains,

with the details contained in the

programme overview.

The corresponding programme sequence,

duration and consumption details are

shown in the bottom half of the overview.

For example:

For a mixture of various types of crockery

and utensils with plenty of food remains

that are not stuck on fast, use the

Auto programme.

Reduce costs!

If only a small number of

dishes have been loaded into

the dishwasher, selecting a

programme that operates at

the next lowest temperature

will usually suffice.

Programme data

The stated programme data are based on

standard operating conditions. The values

can vary considerably according to:

different amounts of dishes

temperature of mains water supply

pressure of mains water supply

ambient temperature

fluctuations in mains voltage

machine-related factors (e.g.

temperature, water volume, ...).

Energy and water consumption is reduced

by up to 1/4 when dishes are washed in

the upper basket only.

Water consumption values are based on a

water hardness setting of 4.

Aquasensor *

* on applicable models

The Aquasensor is an optical measuring

device with which the cloudiness of the

water in the dishwasher is measured. A

photoelectric sensor is used to detect the

degree of soiling in the water, caused by

dissolved food particles such as egg, fat

and rolled oats, etc.

The Aquasensor functions during all

programmes that include a pre-rinse cycle.

If the water is still “clean” at the end of the

pre-rinse cycle, then the same water is

used for the following wash cycle. If the

water is dirty, it is pumped out of the

dishwasher and replaced by fresh water.

The effect is to reduce water consumption

by approx. 5 litres when the dishes are

only “slightly” dirty.

Switching the dishwasher ON

Turn on the tap.

Set main switch 1 to ON.

Indicators light up according to the last

programme that was selected.

This same programme will run again if

no other programme button 6 is

pressed.

For appliances with top basket feature:

If only the top basket is loaded, press

the top-basket button 5 .

The numerical display 3 shows the

expected duration of the programme.

The programme starts automatically.

End of programme

The programme has ended when a figure

appears in the numerical display 3 .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens se 24a660 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens se 24a660 Manual

Product: