123312
9
Zoom out
Zoom in
Previous page
1/38
Next page
en
9
Setting up the water
softener
In order to provide satisfactory rinsing
results, the dishwasher requires soft water,
i.e., containing little or no lime, otherwise
water stains will be left behind on the
dishes and interior containers.
If the tap water exceeds a certain level of
hardness, it must be softened, i.e.,
decalcified, so that it can be used in the
dishwasher.
This is achieved by adding a special salt
to the water softener inside the
dishwasher.
The water softener, that is the required
amount of salt, is set up according to how
hard the tap water is.
The limescale absorption capacity of the
water softening system is limited. When
the water softening system is exhausted, it
must be regenerated, i.e. refreshed with
salt.
The optical limescale sensor determines
the degree of hardness and controls the
water softening system when “Hardness
auto” is selected.
The “Hardness auto” factory setting does
not require any adjustments when the
appliance is switched on for the first time
or if the water hardness varies.
If you would nevertheless like to set
the water softening system manually,
proceed as follows:
Find out the degree of hardness of your
tap water. Your water supply company
or customer service will assist you.
Switch on the appliance with the main
switch 1 . The main menu is
displayed (if switching on the appliance
for the first time, only when a language
has been selected and dispensers
have been filled with salt (if required)
and rinse aid).
Auto Wash
Options Start
Press the “Options” button until the
“Hardness auto” setting is displayed.
Using the buttons or , select the
set value between 0 and 7 which
corresponds with the degree of
hardness of your tap water in the
following table. “Hardness auto”
has been preset at the factory.
Press the button. The set value has
been saved and you are returned to the
Start menu.
If the set value is “0”, the water softening
system is switched off. A low salt level will
not be displayed.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens se 20t590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens se 20t590 in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens se 20t590

Siemens se 20t590 User Manual - German - 38 pages

Siemens se 20t590 User Manual - Dutch - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info