Manual Siemens s40 (page 31 of 44) (English)

230430

Zoom out

Zoom in

1/44

Auto redial

If you have activated Auto redial

and the phone number you are call-

ing is busy or your call is not

answered, the phone makes up to

10 automatic redial attempts.

A special redialling success tone

is heard when the attempt is suc-

cessful. To cancel the auto redial

attempts, just press the left-hand

function key.

Any key answer

You can answer an incoming call by

pressing any key you like, except

the left-hand function key and the

arrow key, by selecting »Any key

answer on«.

Time and charge

The time and charge menu offers

you the possibility of checking the

duration and cost of your calls.

However, the call charge feature

may not be supported by all net-

work operators.

Status Here you can see the

duration and cost of your latest

incoming and outgoing call, your

total incoming and total outgoing

calls and a total of all calls. You can

also see the remaining credit, if

any, (only if you have prepaid your

call charge). To reset your timers,

just press »RESET«.

Display Select whether or not the

call timer should be shown in the

display during a conversation.

Setup

Enter the unit price for your

calls (check with your network

operator) and enter the currency of

your call charge. It is also possible

to enter a maximum call charge

limit; no more phone calls can be

made when this maximum has

been reached.

Facts & Tips

• Do not confuse Auto redial with the

call back function described on p. 49.

In the Call back function, the network

automatically connects you to the

busy subscriber when he is no longer

engaged.

• Resetting of timers and setup of call

charge may require you to enter your

PIN2 code.

Setup menu

Call setup

Setup menu

Enter the Setup menu

by pressing »MENU«

Select »Call setup«

Outgoing call ID

Select »Outgoing call ID« to

choose whether or not the persons

you call should be able to see your

phone number.

Speed dial

Activate »Speed dial« to make it

possible to call numbers in your

address or phone books from the

standby display by pressing only

one key.

Select »Define« and specify

which phone number you want to

assign to the keys 1 to 9.

If you should later want to

change something in the se-

quence of the allocated speed dial

numbers, press »SELECT« and

then select »Modify«.

If you want to remove the phone

number from the allocated speed

dial key, select »Remove«.

Caller access

This feature allows you to limit the

number of callers from which you

will accept calls. You can select

whether you want to receive calls

from »All callers«, from a »Single

caller« or from a »Group of callers«.

Having selected »Single caller« or

»Group of callers«you will be asked

to define the entries or groups

from which you will accept calls.

As long as the caller access fea-

ture is activated, you will see this

symbol in the display.

If you receive a call from a num-

ber from which you don’t allow

calls, the call will automatically be

rejected.You will be informed about

the rejected call by the sym-

bol in the display.

Facts & Tips

• Deactivating

»Speed dial«

enables

you to enter letters, symbols and dig-

its in the standby display and thus

enter a USSD message containing

both letters and digits.

• USSD (Unstructured Supple-

mentary Service Data) is a feature

completely defined by your network

which allows direct communication

between you and your network. An

example of using USSD could be if

entering a certain code of digits

and/or letters terminated by # tells

your network to send you a list of

charges.

• If Caller access is activated you can

deactivate it by pressing »MENU«

and . Press the two keys again

in the same order to reactivate the

feature.

First

User guide S40 GB 01/03/02 10:42 Side 58

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens s40 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens s40 Manual

Product: