297690
66
Zoom out
Zoom in
Previous page
1/79
Next page
08.06.01 35a-ger.fm P 35 - pro, English, A31008-H4100-A1-6-7619
65
Fax/Data
Fax/DataFax/Data
Fax/Data
Technical Information
Technical InformationTechnical Information
Technical Information
Fax/Data Prerequisites
Fax/Data PrerequisitesFax/Data Prerequisites
Fax/Data Prerequisites
Fax and data services must be
enabled. Depending on the network,
there are several different types of
fax/data reception, so you should
check with your service provider.
Your PC must have appropriate
software installed for data/fax
communication.
Connecting Units
Connecting UnitsConnecting Units
Connecting Units
Data cable
Data cableData cable
Data cable
A data cable (see page 74) is used to
connect the phone to the PCs serial
port.
Infrared
InfraredInfrared
Infrared
If the IrDA interface integrated in the
phone is to be used, then the other
device must also have a corre-
sponding interface.
Activate the infrared interface on the
phone.
h
Indicator on the display
Align the infrared windows (max.
distance 50 cm) and activate the IrDA
interfaces.
Setting the PC
Setting the PCSetting the PC
Setting the PC
Your phone has an integral modem.
You will need to install a standard
modem in your PCs operating
system:
Standard modem with
19 200 bit/s
Fax Class 1 modem,
max. 9 600 bit/s
Where appropriate IrDA
115 000 bit/s.
Sending Fax or Data
Sending Fax or DataSending Fax or Data
Sending Fax or Data
During a call:
First set the
6HQG6SHHFK)$; function
(page 63) and then start your PCs
communication program.
Fax only:
Start your PC communication pro-
gram. Enter the required destination
phone number.
N
During transmission.
Receive Fax or Data
Receive Fax or DataReceive Fax or Data
Receive Fax or Data
Before you receive data/faxes,
establish the connection between
the phone and the PC and start
the communication program on
your PC.
The phone display will indicate the
type of call (fax or data) and you will
hear a special signal tone.
Ending Transmission
Ending TransmissionEnding Transmission
Ending Transmission
Transmission is normally ended with
the PC software. If necessary:
(
Press.
Technical Data
Technical DataTechnical Data
Technical Data
Modem Driver
Modem DriverModem Driver
Modem Driver
Conforms to V.25 command set.
Data transmission speed
Data transmission speedData transmission speed
Data transmission speed
Conforms to the ITU-T standard of
V.22bis (transfer at 2400, 4800 and
9600 bit/s).
Facsimile
FacsimileFacsimile
Facsimile
Facsimile operation at 2400, 4800,
7200 and 9600 bit/s. Conforms to
Service Class 1.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens s35i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens s35i in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info