620386
2
Zoom out
Zoom in
Previous page
1/2
Next page
5. Reviewing your program
Press Review then press Yes first on will show repeat pressing Yes until all times have been reviewed when finished
RWB will go back to normal mode after 4 seconds
6. Setting the Time
The RWB1001 comes pre set with correct Date Time should you need to re set the time for any reason Move
programming slider to Clock symbol
Y will appear in the display Press +or – button to change Year when correct Year is in the display Press YES
M will appear in the display Press +or – button to change Month when correct Month is in the display Press YES
D will appear in the display Press +or – button to change Day when correct Day is in the display Press YES
Clock symbol will appear in display Press + or – button to change time when correct time is in the display Press YES
Then move slider to Run
*In some instances the RWB may have been set with the service interval function enabled this option is designed to
remind the end user to contact the relevant person to have the annual service carried out on the boiler
By Law, your gas boiler should be inspected/serviced annually to ensure it is working correctly, to help make sure this
service is carried out at the correct time the RWB can have the Service Interval function enabled. This function will be
enabled and programmed by your Installer, maintenance Engineer, or. Landlord
If it has been set to do so, the RWB will display a message on the screen to remind you that a boiler service is due. This
pre warning countdown will be indicated up to 50 days before the Service is due to allow time to arrange for an
engineer normal functions will continue during this stage .
The amount of Pre warn Days will have been entered by your Installer, maintenance Engineer, or. Landlord you
should contact them on first seeing the Pre-warn. At this point the display will switch between normal display
and the amount of days left. the RWB will also emit a 5 second sound hourly between 9am and 9pm
If the RWB goes past it service day the system will switch of with only the One hour boost functioning and the display
will alternate between the real time and Off
Reset must be pressed after any change to either the (P) Fully pumped -(G) Gravity or the 2/3 Prg per day switch
on back of RWB, Sliders on the front must be in Off when changing from (P) Fully pumped to (G) Gravity
WHAT IS A PROGRAMMER?
...an Explanation for Householders (as recommended by the Energy Savings Trust)
Programmers allow you to set ‘On’ and ‘Off’ time periods. Some models switch the central heating
and domestic hot water on and off at the same time, while others allow the domestic hot water
and heating to come on and go off at different times. Set the ‘On’ and ‘Off’ time periods to suit
your own lifestyle. On some programmers you must also set whether you want the heating and hot
water to run continuously, run under the chosen ‘On’ and ‘Off’ heating periods, or be permanently
off. The time on the programmer must be correct. Some types have to be adjusted in spring and
autumn at the changes between Greenwich Mean Time and British Summer Time. You may be
able to temporarily adjust the heating programme, for example, ‘Override’, ‘Advance’, or ‘Boost’.
These are explained in the manufacturer’s instructions. The heating will not work if the room
thermostat has switched the heating off. And, if you have a hot-water cylinder, the water heating
will not work if the cylinder thermostat detects that the hot water has reached the correct
temperature
MAN0000001507
2


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-rwb1001

Reset search

  • Thermostat just showing a blue screen. No hot water Submitted on 21-4-2021 at 10:03

    Reply Report abuse
  • Thermostat not working just a blue screen any ideas Submitted on 21-4-2021 at 09:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RWB1001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RWB1001 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info