657261
96
Zoom out
Zoom in
Previous page
1/108
Next page
96/108
Siemens Basic Documentation RVP340, RVP350, RVP351 CE1P2545en
Building Technologies 21 Handling 15.03.2011
3 buttons are provided for manual control:
1 button for activating manual control. An LED indicates when manual control is
active. Manual control is quit by pressing the same button again or by pressing
any of the operating mode buttons
2 buttons for manual positioning commands. In plants with mixing valves or
2-port valves, the actuating device can be driven to any position by pressing
the respective button.
When pressing a button, the respective LED lights up
All positioning commands sent to the relays appear on the LCD.
Input and readjustment of all setting parameters, activation of functions and read-
ing of actual values and operating states are based on the operating line principle.
An operating line with an associated number is assigned to each parameter, each
actual value and each function.
A pair of buttons is used to select operating lines and readjust displays.
To select and readjust setting values, the procedure is as follows:
Buttons
Action Effect
Line selection buttons
Press
Selection of next lower operating line
Press
Selection of next higher operating line
Setting buttons
Press
Decrease of displayed value
Press
Increase of displayed value
The set value is adopted …
when selecting the next operating line,
by pressing any of the operating mode buttons.
If input of --.- or --:-- is required, button
or must be pressed until the re-
quired display appears. Then, the display maintains --.- or --:--.
The operating lines are combined in the form of blocks. To reach a specific operat-
ing line of a function block quickly, the other blocks can be skipped, so that it is not
necessary to go through all the other lines. This is made possible by using 2 button
combinations:
Action Effect
Keep depressed and press
Selection of next higher function block
Keep depressed and press
Selection of next lower function block
Buttons and displays
for manual control
Display of positioning
commands
Operating line principle
Buttons
Block skip function
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RVP340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RVP340 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RVP340

Siemens RVP340 User Manual - German - 108 pages

Siemens RVP340 User Manual - French - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info